Skip to main content
Version: mainnet (v0.73)

How to resolve common issues

Below is a list of common issues with running validator and data nodes, and their solutions.

If you come across an issue you don't see addressed here - share it in the validator Discord channel, or on the feedback board.

Some of the issues below will be addressed in future software versions, while others may be a result of mis-configurations.

Problem: Data node fails to start because it times out when fetching history for segment​

You may see the following information in your error log. 

INFO    datanode.start.persistentPre    start/node_pre.go:121   Auto Initialising Datanode From Network History
INFO    datanode.start.persistentPre    networkhistory/initialise.go:61 got most recent history segment {"segment": "from_height:136001 to_height:137000 history_segment_id:\"QmWtU5Xks8CewedyYtibLZ32tgSifoNozyQTLibYNmTmcV\" previous_history_segment_id:\"Qmc6uqPnLdMUTgLuvm5FmSGe3WarveJ9UvB1GvbEf6XsvT\"", "peer": "143.198.66.233:3007"}
INFO    datanode.start.persistentPre    start/node_pre.go:125   fetching history using as the first segment:{QmWtU5Xks8CewedyYtibLZ32tgSifoNozyQTLibYNmTmcV} and minimum blocks to fetch 1
INFO    datanode.start.persistentPre    networkhistory/initialise.go:81 fetching history for segment id:QmWtU5Xks8CewedyYtibLZ32tgSifoNozyQTLibYNmTmcV

failed to initialize datanode from network history: failed to fetch history blocks:failed to fetch history:could not write out the fetched history segment: context deadline exceeded

Solution: Restart data node​

If the above issue happens, try to start the data node one more time.

Problem: Data node fails to start up with the following panic​

You may see the following information in your panic log.

panic: runtime error: invalid memory address or nil pointer dereference [recovered]
        panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x44 pc=0x8791c4]
goroutine 144 [running]:
code.vegaprotocol.io/vega/cmd/vega/node.(*Command).Run.func1.1()
        /home/runner/work/vega/vega/cmd/vega/node/node.go:137 +0x59
panic({0x2d7fa00, 0x56540b0})
        /opt/hostedtoolcache/go/1.19.5/x64/src/runtime/panic.go:884 +0x212
github.com/cosmos/iavl.(*MutableTree).AvailableVersions(0x0)
        /home/runner/go/pkg/mod/github.com/cosmos/iavl@v0.19.4/mutable_tree.go:93 +0x64
code.vegaprotocol.io/vega/core/snapshot.(*Engine).CheckLoaded(0xc001339860)
        /home/runner/work/vega/vega/core/snapshot/engine.go:363 +0x59
code.vegaprotocol.io/vega/core/processor.(*App).Info(0xc001fe2840, {{0x76?, 0x63f14b18?}, 0xc003df6f40?, 0x7fffffffffffffff?})
        /home/runner/work/vega/vega/core/processor/abci.go:534 +0x1e2
code.vegaprotocol.io/vega/core/blockchain/abci.(*App).Info(0xe?, {{0x330f60b?, 0x1f?}, 0xc003dda7e8?, 0x40dd7f?})
        /home/runner/work/vega/vega/core/blockchain/abci/abci.go:27 +0x6b
code.vegaprotocol.io/vega/cmd/vega/node.(*appW).Info(0xc002dc0420?, {{0x330f60b?, 0xc00228dba0?}, 0x565f340?, 0xc003dda878?})
        /home/runner/work/vega/vega/cmd/vega/node/app_wrapper.go:33 +0x59
github.com/tendermint/tendermint/abci/client.(*localClient).InfoSync(0xc003dc8600, {{0x330f60b?, 0xc003dda930?}, 0x4e3625?, 0x1?})
        /home/runner/go/pkg/mod/github.com/informalsystems/tendermint@v0.34.25/abci/client/local_client.go:224 +0x107
github.com/tendermint/tendermint/proxy.(*appConnQuery).InfoSync(0x4e6e86?, {{0x330f60b?, 0xc003dda9f0?}, 0x4e6dc4?, 0xc0000b20c0?})
        /home/runner/go/pkg/mod/github.com/informalsystems/tendermint@v0.34.25/proxy/app_conn.go:155 +0x29
github.com/tendermint/tendermint/consensus.(*Handshaker).Handshake(0xc004c4eda8, {0x3b862b0, 0xc0022f0b60})
        /home/runner/go/pkg/mod/github.com/informalsystems/tendermint@v0.34.25/consensus/replay.go:244 +0x76
github.com/tendermint/tendermint/node.doHandshake({_, _}, {{{0xb, 0x1}, {0xc002373320, 0x7}}, {0xc00038f3c0, 0x1a}, 0x1, 0x6cf42, ...}, ...)
        /home/runner/go/pkg/mod/github.com/informalsystems/tendermint@v0.34.25/node/node.go:329 +0x1b8
github.com/tendermint/tendermint/node.NewNode(0xc001fe1540, {0x3b56970, 0xc0003f23c0}, 0xc001ffef70, {0x3b3bd40, 0xc001fd56b0}, 0x0?, 0x0?, 0xc001ffefb0, {0x3b5c5b0, ...}, ...)
        /home/runner/go/pkg/mod/github.com/informalsystems/tendermint@v0.34.25/node/node.go:777 +0x597
code.vegaprotocol.io/vega/core/blockchain/abci.NewTmNode({{0x0}, 0x1, 0x1, 0x0, 0x0, {0xc001e7c1f0, 0xa}, {{0x0}, {0xc001e1ae88, 0x15}}, ...}, ...)
        /home/runner/work/vega/vega/core/blockchain/abci/tm_node.go:78 +0x6a5
code.vegaprotocol.io/vega/cmd/vega/node.(*Command).startABCI(0xc0019c3c00, {0x3b80100, 0xc001fcda40}, {0x7ffef0370e93, 0x1a}, {0x0?, 0x0?}, {0x0?, 0x0?})
        /home/runner/work/vega/vega/cmd/vega/node/node.go:412 +0x1a7
code.vegaprotocol.io/vega/cmd/vega/node.(*Command).startBlockchain(0xc0019c3c00, {0x7ffef0370e93?, 0x0?}, {0x0, 0x0}, {0x0, 0x0})
        /home/runner/work/vega/vega/cmd/vega/node/node.go:299 +0x39a
code.vegaprotocol.io/vega/cmd/vega/node.(*Command).Run.func1()
        /home/runner/work/vega/vega/cmd/vega/node/node.go:140 +0x7e
created by code.vegaprotocol.io/vega/cmd/vega/node.(*Command).Run
        /home/runner/work/vega/vega/cmd/vega/node/node.go:131 +0x6af

Solution: Check permissions​

The above problem is caused by wrong file permissions for the snapshot database.

To verify: List all files in <vega-home>/state/node/snapshots/snapshot.db/ and check that all files are owned by the user that runs the data node service.

To fix: Change the ownership of all files in that directory to the user that runs data node service, and start the service again.

Possible cause: You may have run the following command when connected as a different user, e.g. root:

# list all the local snapshots
sudo ./vega tools snapshot

Problem: panic: state.AppHash does not match AppHash after replay. Got XXXXXXXXXX, expected YYYYYYYYYY.​

After a protocol upgrade you may get the above error, for example:

core        node/node.go:225        Vega shutdown complete        {"version": "v0.72.10", "version-hash":
"26afd41a2fe4cb20f3fffeae0d4cfe523fc35614"}
Aug 23 14:01:50 vega-testnet visor[3605726]: panic: state.AppHash does not match AppHash after replay. Got
Aug 23 14:01:50 vega-testnet visor[3605726]: FA62EFCF5AAA70B26FB2D746B5BD7FC3709CBA2132A7597D796DD9DC16B65EE0, expected D8CDD4DC0B1133EFF36985B76A9D5FE4DF904933FC85F6B306A00E1357CEF94F.

Did you reset CometBFT without resetting your application's data?

Solution: Start from a snapshot before the protocol upgrade.​

  1. List all of the local snapshots on your node: vega tools snapshot --home <vega_home>
  2. Get the snapshot height for snapshot before the protocol upgrade
  3. If you are using Visor, make sure that directories for a new release exist in the <vegavisor-home>
  4. Rollback a single tendermint block: vega tm rollback --home <tendermint_home>
  5. Start the previous binary version with additional flag --snapshot.load-from-block-height=<selected-snapshot-height>, e.g.: ./vega start --snapshot.load-from-block-height=7885400 --home <vega-home> --tendermint-home <tendermint-home. If you are using Visor, you need to add the above flag to the run-config.toml(e.g: <vegavisor-home>/v0.71.6/run-config.toml).
  6. Wait for upgrade. New node may start automatically if you are using Visor, but it is not guaranteed.
  7. Remove the previously added flag (--snapshot.load-from-block-height).
  8. If your node did not restart automatically: a. For Visor: Stop Visor, link correct version to <vegavisor-home>/current, and restart your node, and start Visor b. For non-Visor setup: Stop the node, start the node with new binary

Problem: Data Node is at block 0, while Core is processing blocks ok​

When you request /statistics from your Data Node REST API, you will get:

  • blockHeight and vegaTime from response body - this is the information about core and it looks ok
  • X-Block-Height and X-Block-Timestamp response headers - this is the information about data node, and you get X-Block-Height: 0
    • you might also get non-zero value, that is way behind core block height, and it is not increasing (if it increases, then it is a different issue)

It means your core process is working ok, but it is not sending any data to the data node process.

Solution: Fix config and restart from remote network history​

  1. Check your data node's broker IP and port config.toml
[Broker]
  # ...
  [Broker.SocketConfig]
    IP = "0.0.0.0"   # 0.0.0.0 will serve on all network interfaces
    Port = 3005  # make sure it matches core config
  1. Verify that core has the broker enabled, and pointed to the correct IP and port config.toml
[Broker]
  # ...
  [Broker.Socket]
    # ...
    Address = "127.0.0.1"  # your Data Node endpoint
    Port = 3005  # your Data Node listening port
    Enabled = true  # send data to the Data Node
  1. If you didn't have to change your config, that means you have a different issue 3a. If you changed your config (either fixed port, or set Entabled to true), then please continue
  2. Stop your core and data node (or just vegavisor)
  3. Configure data node to start from remote Network History. For this, modify data node config.toml
AutoInitialiseFromNetworkHistory = true
# ...
[SQLStore]
  WipeOnStartup = true  # IMPORTANT: remember to change this back to false once node is started
# ...
[NetworkHistory]
  # ...
  Enabled = true
  WipeOnStartup = true  # IMPORTANT: remember to change this back to false once node is started
  # ...
  [NetworkHistory.Store]
    # ...
    BootstrapPeers = [you need to put at least one trusted peer here]
    # ...
  [NetworkHistory.Initialise]
    # ...
    TimeOut = "1h"  # Make sure the timeout is not too small
  1. Make sure core timeout is not too small. For that modify core config.toml
[Broker]
  # ...
  [Broker.Socket]
    DialTimeout = "1h"  # Make sure the timeout is not too small
  1. If you are using vega visor make sure the timeout is not too small. For that modify visor config.toml
# Try every 2 seconds, 1800 retries is 1h
maxNumberOfFirstConnectionRetries = 1800
  1. Start vegavisor or core + date node (order doesn't matter)

Problem: failed to copy data into hyper-table ...: ERROR: extra data after last expected column (SQLSTATE 22P04)​

2023-10-13T17:29:22.607+0800    INFO    datanode.networkHistory.service snapshot/service_load_snapshot.go:300   copying vega-mainnet-0011-22-18710202-18710501.zip into database
failed to initialize datanode from network history: failed to load history into the datanode: failed to load snapshot data:failed to load segments for database version 22: failed to load history segments: failed to load history segment {Network History Segment for Chain ID:vega-mainnet-0011 Height From:18710202 Height To:18710501}: failed to copy data into the database vega-mainnet-0011-22-18710202-18710501.zip : failed to copy data into table market_data: failed to copy history table data into database: failed to copy data into hyper-table market_data: ERROR: extra data after last expected column (SQLSTATE 22P04)

The error usually occurs when you are loading a specific history segment (e.g: the last one) into an incorrect version of Vega, for example an old version of the binary.

Vega adds/modifies/removes SQL schemas during the migration between versions. You must load data from specific segment into the corresponding version of the database that the segment was created for.

Solution: Fix the vega version​

Check the vega version with the command vega version and compare with the version the segment has been created for. To do it, you can use the /api/v2/snapshots(e.g: https://api0.vega.community/api/v2/snapshots) endpoint to check what version, was deployed on the specific block you are interested in.

Problem: My validator node is running with Visor, but it fails with auto-install.​

First, you should check the logs from Visor. An example log is below:

Oct 24 11:33:09 moonrock visor[260678]: Error: failed to prepare next upgrade folder: failed to auto install folder "/home/vega/vega-visor/v0.73.0-rc.1" for release "v0.73.0-rc.1": missing required auto install vega asset definition in Visor config

Solution: Check the Visor config​

The most frequent issue when your auto-install procedure fails is the wrong Visor configuration.

Visor works the following way during auto-install:

  1. Checks if auto-install is enabled
  2. Copies the folder and the run-config.toml from the previous version - the version you are doing the protocol upgrade from
  3. Downloads the binary from the given repository - binary name and repository are taken from Visor config
  4. Starts the downloaded binary

The correct config for Visor should look similar to the following:

"YOUR_VEGAVISOR_HOME/config.toml

# Try every 2 seconds, 172800 retries is 96h
maxNumberOfFirstConnectionRetries = 172800
maxNumberOfRestarts = 3
restartsDelaySeconds = 5
stopDelaySeconds = 0
stopSignalTimeoutSeconds = 15

[upgradeFolders]
  "vX.X.X" = "vX.X.X"

[autoInstall]
  enabled = true
  repositoryOwner = "vegaprotocol"
  repository = "vega"
  [autoInstall.asset]
    name = "vega-linux-amd64.zip"
    binaryName = "vega"