Get transaction
Get a transaction from the Vega blockchain
Path Parameters
Hash of the transaction
- 200
- default
A successful response.
Schema
- Array [
- To reduce the size from the current value set a negative integer value
- To increase the size from the current value, set a positive integer value
- To leave the size unchanged set a value of zero This field needs to be scaled using the market's position decimal places.
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- To reduce the size from the current value set a negative integer value
- To increase the size from the current value, set a positive integer value
- To leave the size unchanged set a value of zero This field needs to be scaled using the market's position decimal places.
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- ACCOUNT_TYPE_UNSPECIFIED: Default value
- ACCOUNT_TYPE_INSURANCE: Insurance pool accounts contain insurance pool funds for a market
- ACCOUNT_TYPE_SETTLEMENT: Settlement accounts exist only during settlement or mark-to-market
- ACCOUNT_TYPE_MARGIN: Margin accounts contain funds set aside for the margin needed to support a party's open positions. Each party will have a margin account for each market they have traded in. Required initial margin is allocated to each market from user's general account. Collateral in the margin account can't be withdrawn or used as margin on another market until it is released back to the general account. Vega protocol uses an internal accounting system to segregate funds held as margin from other funds to ensure they are never lost or 'double spent'
- ACCOUNT_TYPE_GENERAL: General accounts contain the collateral for a party that is not otherwise allocated. A party will have multiple general accounts, one for each asset they want to trade with
- ACCOUNT_TYPE_FEES_INFRASTRUCTURE: Infrastructure accounts contain fees earned by providing infrastructure on Vega
- ACCOUNT_TYPE_FEES_LIQUIDITY: Liquidity accounts contain fees earned by providing liquidity on Vega markets
- ACCOUNT_TYPE_FEES_MAKER: This account is created to hold fees earned by placing orders that sit on the book and are then matched with an incoming order to create a trade - These fees reward parties who provide the best priced liquidity that actually allows trading to take place
- ACCOUNT_TYPE_BOND: This account is created to maintain liquidity providers funds commitments
- ACCOUNT_TYPE_EXTERNAL: External account represents an external source (deposit/withdrawal)
- ACCOUNT_TYPE_GLOBAL_INSURANCE: Global insurance account for the asset
- ACCOUNT_TYPE_GLOBAL_REWARD: Global reward account for the asset
- ACCOUNT_TYPE_PENDING_TRANSFERS: Per asset account used to store pending transfers (if any)
- ACCOUNT_TYPE_REWARD_MAKER_PAID_FEES: Per asset reward account for fees paid to makers
- ACCOUNT_TYPE_REWARD_MAKER_RECEIVED_FEES: Per asset reward account for fees received by makers
- ACCOUNT_TYPE_REWARD_LP_RECEIVED_FEES: Per asset reward account for fees received by liquidity providers
- ACCOUNT_TYPE_REWARD_MARKET_PROPOSERS: Per asset reward account for market proposers when the market goes above some trading threshold
- ACCOUNT_TYPE_HOLDING: Per asset account for holding in-flight unfilled orders' funds
- ACCOUNT_TYPE_LP_LIQUIDITY_FEES: Network controlled liquidity provider's account, per market, to hold accrued liquidity fees.
- ACCOUNT_TYPE_LIQUIDITY_FEES_BONUS_DISTRIBUTION: Network controlled liquidity fees bonus distribution account, per market.
- ACCOUNT_TYPE_NETWORK_TREASURY: Network controlled treasury
- ACCOUNT_TYPE_VESTING_REWARDS: Account holding user's rewards for the vesting period
- ACCOUNT_TYPE_VESTED_REWARDS: Account holding user's rewards after the vesting period
- ACCOUNT_TYPE_REWARD_AVERAGE_POSITION: Per asset market reward account given for average position
- ACCOUNT_TYPE_REWARD_RELATIVE_RETURN: Per asset market reward account given for relative return
- ACCOUNT_TYPE_REWARD_RETURN_VOLATILITY: Per asset market reward account given for return volatility
- ACCOUNT_TYPE_REWARD_VALIDATOR_RANKING: Per asset market reward account given to validators by their ranking
- ACCOUNT_TYPE_PENDING_FEE_REFERRAL_REWARD: Per asset account for pending fee referral reward payouts
- DISTRIBUTION_STRATEGY_PRO_RATA: Rewards funded using the pro-rata strategy should be distributed pro-rata by each entity's reward metric, scaled by any active multipliers that party has.
- DISTRIBUTION_STRATEGY_RANK: Rewards funded using the party rank.
- Array [
- ]
- ACCOUNT_TYPE_UNSPECIFIED: Default value
- ACCOUNT_TYPE_INSURANCE: Insurance pool accounts contain insurance pool funds for a market
- ACCOUNT_TYPE_SETTLEMENT: Settlement accounts exist only during settlement or mark-to-market
- ACCOUNT_TYPE_MARGIN: Margin accounts contain funds set aside for the margin needed to support a party's open positions. Each party will have a margin account for each market they have traded in. Required initial margin is allocated to each market from user's general account. Collateral in the margin account can't be withdrawn or used as margin on another market until it is released back to the general account. Vega protocol uses an internal accounting system to segregate funds held as margin from other funds to ensure they are never lost or 'double spent'
- ACCOUNT_TYPE_GENERAL: General accounts contain the collateral for a party that is not otherwise allocated. A party will have multiple general accounts, one for each asset they want to trade with
- ACCOUNT_TYPE_FEES_INFRASTRUCTURE: Infrastructure accounts contain fees earned by providing infrastructure on Vega
- ACCOUNT_TYPE_FEES_LIQUIDITY: Liquidity accounts contain fees earned by providing liquidity on Vega markets
- ACCOUNT_TYPE_FEES_MAKER: This account is created to hold fees earned by placing orders that sit on the book and are then matched with an incoming order to create a trade - These fees reward parties who provide the best priced liquidity that actually allows trading to take place
- ACCOUNT_TYPE_BOND: This account is created to maintain liquidity providers funds commitments
- ACCOUNT_TYPE_EXTERNAL: External account represents an external source (deposit/withdrawal)
- ACCOUNT_TYPE_GLOBAL_INSURANCE: Global insurance account for the asset
- ACCOUNT_TYPE_GLOBAL_REWARD: Global reward account for the asset
- ACCOUNT_TYPE_PENDING_TRANSFERS: Per asset account used to store pending transfers (if any)
- ACCOUNT_TYPE_REWARD_MAKER_PAID_FEES: Per asset reward account for fees paid to makers
- ACCOUNT_TYPE_REWARD_MAKER_RECEIVED_FEES: Per asset reward account for fees received by makers
- ACCOUNT_TYPE_REWARD_LP_RECEIVED_FEES: Per asset reward account for fees received by liquidity providers
- ACCOUNT_TYPE_REWARD_MARKET_PROPOSERS: Per asset reward account for market proposers when the market goes above some trading threshold
- ACCOUNT_TYPE_HOLDING: Per asset account for holding in-flight unfilled orders' funds
- ACCOUNT_TYPE_LP_LIQUIDITY_FEES: Network controlled liquidity provider's account, per market, to hold accrued liquidity fees.
- ACCOUNT_TYPE_LIQUIDITY_FEES_BONUS_DISTRIBUTION: Network controlled liquidity fees bonus distribution account, per market.
- ACCOUNT_TYPE_NETWORK_TREASURY: Network controlled treasury
- ACCOUNT_TYPE_VESTING_REWARDS: Account holding user's rewards for the vesting period
- ACCOUNT_TYPE_VESTED_REWARDS: Account holding user's rewards after the vesting period
- ACCOUNT_TYPE_REWARD_AVERAGE_POSITION: Per asset market reward account given for average position
- ACCOUNT_TYPE_REWARD_RELATIVE_RETURN: Per asset market reward account given for relative return
- ACCOUNT_TYPE_REWARD_RETURN_VOLATILITY: Per asset market reward account given for return volatility
- ACCOUNT_TYPE_REWARD_VALIDATOR_RANKING: Per asset market reward account given to validators by their ranking
- ACCOUNT_TYPE_PENDING_FEE_REFERRAL_REWARD: Per asset account for pending fee referral reward payouts
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- ]
- Array [
- Array [
- ]
- ]
- DISTRIBUTION_STRATEGY_PRO_RATA: Rewards funded using the pro-rata strategy should be distributed pro-rata by each entity's reward metric, scaled by any active multipliers that party has.
- DISTRIBUTION_STRATEGY_RANK: Rewards funded using the party rank.
- Array [
- ]
- TX_VERSION_UNSPECIFIED: Transaction version is unspecified.
- TX_VERSION_V2: Transaction requires the addition of a proof-of-work calculation.
- TX_VERSION_V3: Transaction input data contains a prepended chain ID to prevent use of a single transaction across multiple networks.
transaction object
command object
Input data for a transaction containing a network command for the Vega network to execute. Once populated the protobuf message should be marshalled into a byte array and included in a transaction message.
announceNode object
Command used by a node operator to announce its node as a pending validator.
URL to the node operator's avatar.
Public key for the blockchain, currently the node's CometBFT key.
Country code (ISO 3166-1 alpha-2) for the location of the node.
Ethereum public key of the node being announced.
ethereumSignature object
Signature from the node made using the ethereum wallet.
Algorithm used to create the signature.
Hex encoded bytes of the signature.
Version of the algorithm used to create the signature.
Epoch from which the node is expected to be ready to validate blocks.
Node ID of the validator, which is the node's public master key.
URL to the node operators homepage allowing stake holders to make an informed decision when delegating.
Human-readable name of the node.
Ethereum public key to use as a submitter to allow automatic signature generation.
Vega public key of the node being announced.
Vega public key derivation index.
vegaSignature object
Signature from the node made using the Vega wallet.
Algorithm used to create the signature.
Hex encoded bytes of the signature.
Version of the algorithm used to create the signature.
applyReferralCode object
Command to apply a referral code.
Referral code, normally the referral set ID, for the party to join.
batchMarketInstructions object
Command to submit a batch of order instructions.
amendments object[]
List of order amendments to be processed sequentially.
Timestamp, in Unix nanoseconds, for the new expiry time for the order.
Market ID that the order was originally submitted to.
ID of the order to amend.
New pegged offset for the order. This field is an unsigned integer scaled to the market's decimal places.
Possible values: [PEGGED_REFERENCE_UNSPECIFIED
, PEGGED_REFERENCE_MID
, PEGGED_REFERENCE_BEST_BID
, PEGGED_REFERENCE_BEST_ASK
]
Default value: PEGGED_REFERENCE_UNSPECIFIED
New pegged reference for the order.
New price for the order. This field is an unsigned integer scaled to the market's decimal places.
Amend the size for the order by the delta specified:
Possible values: [TIME_IN_FORCE_UNSPECIFIED
, TIME_IN_FORCE_GTC
, TIME_IN_FORCE_GTT
, TIME_IN_FORCE_IOC
, TIME_IN_FORCE_FOK
, TIME_IN_FORCE_GFA
, TIME_IN_FORCE_GFN
]
Default value: TIME_IN_FORCE_UNSPECIFIED
New time in force for the order.
cancellations object[]
List of order cancellations to be processed sequentially.
Restrict cancellations to those submitted to the given market. If not set, all stop orders across all markets will be cancelled.
Restrict cancellations to an order with the given ID. If set, then a market ID must also be provided.
stopOrdersCancellation object[]
List of stop order cancellations to be processed sequentially.
Restrict cancellations to those submitted to the given market. If not set, all stop orders across all markets will be cancelled.
Restrict cancellations to a stop order with the given ID. If set, then a market ID must also be provided.
stopOrdersSubmission object[]
List of stop order submissions to be processed sequentially.
fallsBelow object
Stop order that will be triggered if the price falls below a given trigger price.
Timestamp, in Unix nanoseconds, for when the stop order should expire. If not set the stop order will not expire.
Possible values: [EXPIRY_STRATEGY_UNSPECIFIED
, EXPIRY_STRATEGY_CANCELS
, EXPIRY_STRATEGY_SUBMIT
]
Default value: EXPIRY_STRATEGY_UNSPECIFIED
Strategy to adopt if the expiry time is reached.
orderSubmission object
Order to be submitted once the trigger is breached.
Timestamp, in Unix nanoseconds, for when the order will expire. Can only be set when the order's time-in-force is GTT.
icebergOpts object
Iceberg order details. If set, the order will exist on the order book in chunks.
Minimum allowed remaining size of the order before it is replenished back to its peak size.
Size of the order that is made visible and can be traded with during the execution of a single order.
Market ID to submit the order to.
peggedOrder object
Pegged order details. If set, the order's price will be offset from a particular reference price of the order book at all times.
Offset from the price reference.
Possible values: [PEGGED_REFERENCE_UNSPECIFIED
, PEGGED_REFERENCE_MID
, PEGGED_REFERENCE_BEST_BID
, PEGGED_REFERENCE_BEST_ASK
]
Default value: PEGGED_REFERENCE_UNSPECIFIED
Price point the order is linked to.
If set, the order will only be executed if it would not trade on entry to the order book. Only valid for limit orders.
Price for the order, the price is an integer, for example 123456
is a correctly
formatted price of 1.23456
assuming market configured to 5 decimal places,
required field for limit orders, however it is not required for market orders.
This field is an unsigned integer scaled to the market's decimal places.
If set, the order will only be executed if the outcome of the trade moves the trader's position closer to 0. Only valid for non-persistent orders.
Arbitrary optional reference for the order, to be used as a human-readable non-unique identifier for the order.
Possible values: [SIDE_UNSPECIFIED
, SIDE_BUY
, SIDE_SELL
]
Default value: SIDE_UNSPECIFIED
Which side of the order book the order is for, e.g. buy or sell.
Size for the order, for example, in a futures market the size equals the number of units.
Possible values: [TIME_IN_FORCE_UNSPECIFIED
, TIME_IN_FORCE_GTC
, TIME_IN_FORCE_GTT
, TIME_IN_FORCE_IOC
, TIME_IN_FORCE_FOK
, TIME_IN_FORCE_GFA
, TIME_IN_FORCE_GFN
]
Default value: TIME_IN_FORCE_UNSPECIFIED
Time in force indicates how long an order will remain active before it is executed or expires..
Possible values: [TYPE_UNSPECIFIED
, TYPE_LIMIT
, TYPE_MARKET
, TYPE_NETWORK
]
Default value: TYPE_UNSPECIFIED
Type of the order.
Order will be submitted if the last traded price on the market breaches the given price.
Order will be submitted if the last traded price has moved the given percent from the highest/lowest mark price since the stop order was submitted.
risesAbove object
Stop order that will be triggered if the price rises above a given trigger price.
Timestamp, in Unix nanoseconds, for when the stop order should expire. If not set the stop order will not expire.
Possible values: [EXPIRY_STRATEGY_UNSPECIFIED
, EXPIRY_STRATEGY_CANCELS
, EXPIRY_STRATEGY_SUBMIT
]
Default value: EXPIRY_STRATEGY_UNSPECIFIED
Strategy to adopt if the expiry time is reached.
orderSubmission object
Order to be submitted once the trigger is breached.
Timestamp, in Unix nanoseconds, for when the order will expire. Can only be set when the order's time-in-force is GTT.
icebergOpts object
Iceberg order details. If set, the order will exist on the order book in chunks.
Minimum allowed remaining size of the order before it is replenished back to its peak size.
Size of the order that is made visible and can be traded with during the execution of a single order.
Market ID to submit the order to.
peggedOrder object
Pegged order details. If set, the order's price will be offset from a particular reference price of the order book at all times.
Offset from the price reference.
Possible values: [PEGGED_REFERENCE_UNSPECIFIED
, PEGGED_REFERENCE_MID
, PEGGED_REFERENCE_BEST_BID
, PEGGED_REFERENCE_BEST_ASK
]
Default value: PEGGED_REFERENCE_UNSPECIFIED
Price point the order is linked to.
If set, the order will only be executed if it would not trade on entry to the order book. Only valid for limit orders.
Price for the order, the price is an integer, for example 123456
is a correctly
formatted price of 1.23456
assuming market configured to 5 decimal places,
required field for limit orders, however it is not required for market orders.
This field is an unsigned integer scaled to the market's decimal places.
If set, the order will only be executed if the outcome of the trade moves the trader's position closer to 0. Only valid for non-persistent orders.
Arbitrary optional reference for the order, to be used as a human-readable non-unique identifier for the order.
Possible values: [SIDE_UNSPECIFIED
, SIDE_BUY
, SIDE_SELL
]
Default value: SIDE_UNSPECIFIED
Which side of the order book the order is for, e.g. buy or sell.
Size for the order, for example, in a futures market the size equals the number of units.
Possible values: [TIME_IN_FORCE_UNSPECIFIED
, TIME_IN_FORCE_GTC
, TIME_IN_FORCE_GTT
, TIME_IN_FORCE_IOC
, TIME_IN_FORCE_FOK
, TIME_IN_FORCE_GFA
, TIME_IN_FORCE_GFN
]
Default value: TIME_IN_FORCE_UNSPECIFIED
Time in force indicates how long an order will remain active before it is executed or expires..
Possible values: [TYPE_UNSPECIFIED
, TYPE_LIMIT
, TYPE_MARKET
, TYPE_NETWORK
]
Default value: TYPE_UNSPECIFIED
Type of the order.
Order will be submitted if the last traded price on the market breaches the given price.
Order will be submitted if the last traded price has moved the given percent from the highest/lowest mark price since the stop order was submitted.
submissions object[]
List of order submissions to be processed sequentially.
Timestamp, in Unix nanoseconds, for when the order will expire. Can only be set when the order's time-in-force is GTT.
icebergOpts object
Iceberg order details. If set, the order will exist on the order book in chunks.
Minimum allowed remaining size of the order before it is replenished back to its peak size.
Size of the order that is made visible and can be traded with during the execution of a single order.
Market ID to submit the order to.
peggedOrder object
Pegged order details. If set, the order's price will be offset from a particular reference price of the order book at all times.
Offset from the price reference.
Possible values: [PEGGED_REFERENCE_UNSPECIFIED
, PEGGED_REFERENCE_MID
, PEGGED_REFERENCE_BEST_BID
, PEGGED_REFERENCE_BEST_ASK
]
Default value: PEGGED_REFERENCE_UNSPECIFIED
Price point the order is linked to.
If set, the order will only be executed if it would not trade on entry to the order book. Only valid for limit orders.
Price for the order, the price is an integer, for example 123456
is a correctly
formatted price of 1.23456
assuming market configured to 5 decimal places,
required field for limit orders, however it is not required for market orders.
This field is an unsigned integer scaled to the market's decimal places.
If set, the order will only be executed if the outcome of the trade moves the trader's position closer to 0. Only valid for non-persistent orders.
Arbitrary optional reference for the order, to be used as a human-readable non-unique identifier for the order.
Possible values: [SIDE_UNSPECIFIED
, SIDE_BUY
, SIDE_SELL
]
Default value: SIDE_UNSPECIFIED
Which side of the order book the order is for, e.g. buy or sell.
Size for the order, for example, in a futures market the size equals the number of units.
Possible values: [TIME_IN_FORCE_UNSPECIFIED
, TIME_IN_FORCE_GTC
, TIME_IN_FORCE_GTT
, TIME_IN_FORCE_IOC
, TIME_IN_FORCE_FOK
, TIME_IN_FORCE_GFA
, TIME_IN_FORCE_GFN
]
Default value: TIME_IN_FORCE_UNSPECIFIED
Time in force indicates how long an order will remain active before it is executed or expires..
Possible values: [TYPE_UNSPECIFIED
, TYPE_LIMIT
, TYPE_MARKET
, TYPE_NETWORK
]
Default value: TYPE_UNSPECIFIED
Type of the order.
Block height which has been used to calculate the transaction proof-of-work.
cancelTransfer object
Command to cancel a recurring transfer.
Transfer ID of the transfer to cancel.
chainEvent object
Validator command sent automatically to notify the Vega chain of an off-chain event.
builtin object
Built-in asset event.
deposit object
Built-in asset deposit.
Amount to be deposited. This field is an unsigned integer scaled to the asset's decimal places.
Vega party ID i.e. public key.
Vega network internal asset ID.
withdrawal object
Built-in asset withdrawal.
The amount to be withdrawn. This field is an unsigned integer scaled to the asset's decimal places.
Vega network party ID i.e. public key.
Vega network internal asset ID.
contractCall object
Ethereum contract call event.
Ethereum block height.
Ethereum block time in Unix seconds.
Error message if the call failed.
Result of contract call, packed according to the ABI stored in the associated data source spec.
ID of the data source spec that triggered this contract call.
erc20 object
Ethereum ERC20 event.
assetDelist object
De-list an ERC20 asset.
Vega network internal asset ID.
assetLimitsUpdated object
Update an ERC20 asset.
Updated lifetime limits.
Ethereum wallet that initiated the deposit.
Vega network internal asset ID.
Updated withdrawal threshold.
assetList object
List an ERC20 asset.
Ethereum address of the asset.
Vega network internal asset ID.
Block in which the transaction was added.
Bridge operations has been resumed.
Bridge operations has been stopped.
deposit object
Deposit ERC20 asset.
Amount to be deposited.
Ethereum wallet that initiated the deposit.
Vega party ID i.e. public key that is the target of the deposit.
Vega network internal asset ID.
Index of the log in the transaction.
withdrawal object
Withdraw ERC20 asset.
Reference nonce used for the transaction.
Target Ethereum wallet address.
Vega network internal asset ID.
erc20Multisig object
Ethereum ERC20 multisig event.
signerAdded object
Time at which the block was produced will be used to inform the core at what time the stake was made unavailable.
signerRemoved object
Time at which the block was produced. Will be used to inform the core at what time the stake was made unavailable.
thresholdSet object
Time at which the block was produced. Will be used to inform the core at what time the stake was made unavailable.
Arbitrary one-time integer used to prevent replay attacks.
stakingEvent object
Ethereum Staking event.
Block in which the transaction was added.
Index of the log in the transaction.
stakeDeposited object
Amount deposited as an unsigned base 10 integer scaled to the asset's decimal places.
Time at which the block was produced. Will be used to inform the core at what time the stake started to be available.
Hex encoded public key of the party receiving the stake deposit.
stakeRemoved object
Amount removed as a base 10 unsigned integer scaled to the asset's decimal places.
The time at which the block was produced will be used to inform the core at what time the stake was made unavailable.
Ethereum address of the user removing stake. This should be hex encoded with 0x prefix.
Hex encoded public key of the party from which to remove stake.
totalSupply object
Total supply observed for the token as an unsigned based 10 integer scaled to the asset's decimal places.
ID of the transaction on the foreign chain that caused the event.
createReferralSet object
Command to create a referral set.
Whether or not the referral set should be considered a team that can participate in team games on the network.
team object
Team details, if the referral set is to be considered a team.
External link to an avatar for the team.
Whether or not the team is closed to new party members.
Name of the team.
External link to the team's homepage.
delegateSubmission object
Command to delegate tokens to a validator.
Amount of stake to delegate, as an unsigned integer scaled to the governance asset's decimal places.
Node ID to delegate stake to.
ethereumKeyRotateSubmission object
Validator command sent manually by a node operator to rotate their node's Ethereum keys.
Ethereum address of the node's current Ethereum keys.
ethereumSignature object
Signature signed by the new Ethereum key that can be verified to prove ownership.
Algorithm used to create the signature.
Hex encoded bytes of the signature.
Version of the algorithm used to create the signature.
Ethereum address that is being rotated to.
Ethereum public key to use as a submitter to allow automatic signature generation.
Block height at which the key rotation will take effect.
issueSignatures object
Command to request signatures to amend the multisig-control contract.
Possible values: [NODE_SIGNATURE_KIND_UNSPECIFIED
, NODE_SIGNATURE_KIND_ASSET_NEW
, NODE_SIGNATURE_KIND_ASSET_WITHDRAWAL
, NODE_SIGNATURE_KIND_ERC20_MULTISIG_SIGNER_ADDED
, NODE_SIGNATURE_KIND_ERC20_MULTISIG_SIGNER_REMOVED
, NODE_SIGNATURE_KIND_ASSET_UPDATE
]
Default value: NODE_SIGNATURE_KIND_UNSPECIFIED
What kind of signatures to generate, namely for whether a signer is being added or removed.
Ethereum address which will submit the signatures to the smart contract.
Node ID of the validator node that will be signed in or out of the smart contract.
keyRotateSubmission object
Validator command sent manually by a node operator to rotate their node's Vega keys.
Hash of the node's current Vega public key.
Vega public key that would be rotated to.
New Vega public key derivation index.
Block height at which the key rotation will take effect.
liquidityProvisionAmendment object
Command to amend a liquidity commitment.
New commitment amount.
New nominated liquidity fee factor.
Market that the submitter wants to amend the liquidity commitment for.
New arbitrary reference to be added to every order created out of this liquidity provision submission.
liquidityProvisionCancellation object
Command to cancel a liquidity commitment.
Market that the submitter will stop providing liquidity for.
liquidityProvisionSubmission object
Command to submit a liquidity commitment.
Amount that the submitter will commit as liquidity to the market, specified as a unitless number in the settlement asset of the market. This field is an unsigned integer scaled using the asset's decimal places.
Nominated liquidity fee factor, which is an input to the calculation of taker fees on the market, as per setting fees and rewarding liquidity providers.
Market that the submitter wishes to provide liquidity for.
Arbitrary reference to be added to every order created out of this liquidity provision submission.
nodeSignature object
Validator command sent automatically to provide signatures for the Ethereum bridge.
ID of the resource that the signature relates to.
Possible values: [NODE_SIGNATURE_KIND_UNSPECIFIED
, NODE_SIGNATURE_KIND_ASSET_NEW
, NODE_SIGNATURE_KIND_ASSET_WITHDRAWAL
, NODE_SIGNATURE_KIND_ERC20_MULTISIG_SIGNER_ADDED
, NODE_SIGNATURE_KIND_ERC20_MULTISIG_SIGNER_REMOVED
, NODE_SIGNATURE_KIND_ASSET_UPDATE
]
Default value: NODE_SIGNATURE_KIND_UNSPECIFIED
Kind of resource being signed.
Signature generated by the node.
nodeVote object
Validator command sent automatically to vote on that validity of an external resource.
Reference identifying the resource that has been verified.
Possible values: [TYPE_UNSPECIFIED
, TYPE_STAKE_DEPOSITED
, TYPE_STAKE_REMOVED
, TYPE_FUNDS_DEPOSITED
, TYPE_SIGNER_ADDED
, TYPE_SIGNER_REMOVED
, TYPE_BRIDGE_STOPPED
, TYPE_BRIDGE_RESUMED
, TYPE_ASSET_LISTED
, TYPE_LIMITS_UPDATED
, TYPE_STAKE_TOTAL_SUPPLY
, TYPE_SIGNER_THRESHOLD_SET
, TYPE_GOVERNANCE_VALIDATE_ASSET
, TYPE_ETHEREUM_CONTRACT_CALL_RESULT
]
Default value: TYPE_UNSPECIFIED
Type of external event that has been verified.
Arbitrary number used to provide uniqueness to the signature of two otherwise identical input data, preventing replay attacks. Must be set to a different value for all new transactions sent by a party. It is advised to generate this number randomly.
oracleDataSubmission object
Command to submit external oracle data.
Data provided by the data source.
Possible values: [ORACLE_SOURCE_UNSPECIFIED
, ORACLE_SOURCE_OPEN_ORACLE
, ORACLE_SOURCE_JSON
, ORACLE_SOURCE_ETHEREUM
]
Default value: ORACLE_SOURCE_UNSPECIFIED
Source from which the data is coming from.
orderAmendment object
A command that allows a party to update the details of an existing order. Any field that is left unset or as a default value indicates that this field on the original order will be left unchanged. It is not possible to change an order's type through this command.
Timestamp, in Unix nanoseconds, for the new expiry time for the order.
Market ID that the order was originally submitted to.
ID of the order to amend.
New pegged offset for the order. This field is an unsigned integer scaled to the market's decimal places.
Possible values: [PEGGED_REFERENCE_UNSPECIFIED
, PEGGED_REFERENCE_MID
, PEGGED_REFERENCE_BEST_BID
, PEGGED_REFERENCE_BEST_ASK
]
Default value: PEGGED_REFERENCE_UNSPECIFIED
New pegged reference for the order.
New price for the order. This field is an unsigned integer scaled to the market's decimal places.
Amend the size for the order by the delta specified:
Possible values: [TIME_IN_FORCE_UNSPECIFIED
, TIME_IN_FORCE_GTC
, TIME_IN_FORCE_GTT
, TIME_IN_FORCE_IOC
, TIME_IN_FORCE_FOK
, TIME_IN_FORCE_GFA
, TIME_IN_FORCE_GFN
]
Default value: TIME_IN_FORCE_UNSPECIFIED
New time in force for the order.
orderCancellation object
A command that instructs the network to cancel orders, active or partially filled, that were previously submitted by the sender of this transaction. It is not possible to cancel another party's order with this command.
Restrict cancellations to those submitted to the given market. If not set, all stop orders across all markets will be cancelled.
Restrict cancellations to an order with the given ID. If set, then a market ID must also be provided.
orderSubmission object
A command that submits an order to the Vega network for a given market.
Timestamp, in Unix nanoseconds, for when the order will expire. Can only be set when the order's time-in-force is GTT.
icebergOpts object
Iceberg order details. If set, the order will exist on the order book in chunks.
Minimum allowed remaining size of the order before it is replenished back to its peak size.
Size of the order that is made visible and can be traded with during the execution of a single order.
Market ID to submit the order to.
peggedOrder object
Pegged order details. If set, the order's price will be offset from a particular reference price of the order book at all times.
Offset from the price reference.
Possible values: [PEGGED_REFERENCE_UNSPECIFIED
, PEGGED_REFERENCE_MID
, PEGGED_REFERENCE_BEST_BID
, PEGGED_REFERENCE_BEST_ASK
]
Default value: PEGGED_REFERENCE_UNSPECIFIED
Price point the order is linked to.
If set, the order will only be executed if it would not trade on entry to the order book. Only valid for limit orders.
Price for the order, the price is an integer, for example 123456
is a correctly
formatted price of 1.23456
assuming market configured to 5 decimal places,
required field for limit orders, however it is not required for market orders.
This field is an unsigned integer scaled to the market's decimal places.
If set, the order will only be executed if the outcome of the trade moves the trader's position closer to 0. Only valid for non-persistent orders.
Arbitrary optional reference for the order, to be used as a human-readable non-unique identifier for the order.
Possible values: [SIDE_UNSPECIFIED
, SIDE_BUY
, SIDE_SELL
]
Default value: SIDE_UNSPECIFIED
Which side of the order book the order is for, e.g. buy or sell.
Size for the order, for example, in a futures market the size equals the number of units.
Possible values: [TIME_IN_FORCE_UNSPECIFIED
, TIME_IN_FORCE_GTC
, TIME_IN_FORCE_GTT
, TIME_IN_FORCE_IOC
, TIME_IN_FORCE_FOK
, TIME_IN_FORCE_GFA
, TIME_IN_FORCE_GFN
]
Default value: TIME_IN_FORCE_UNSPECIFIED
Time in force indicates how long an order will remain active before it is executed or expires..
Possible values: [TYPE_UNSPECIFIED
, TYPE_LIMIT
, TYPE_MARKET
, TYPE_NETWORK
]
Default value: TYPE_UNSPECIFIED
Type of the order.
proposalSubmission object
Command to submit a governance proposal.
rationale object
Rationale behind a proposal.
Description to show a short title / something in case the link goes offline. This is to be between 0 and 20k unicode characters. This is mandatory for all proposals.
Title to be used to give a short description of the proposal in lists. This is to be between 0 and 100 unicode characters. This is mandatory for all proposals.
Arbitrary human-readable reference identifying the proposal.
terms object
Proposal terms containing the type and details of the proposal, as well as time spans for voting and enactment.
cancelTransfer object
Cancel a governance transfer.
changes object
ID of the governance transfer proposal.
Timestamp as Unix time in seconds when voting closes for this proposal,
constrained by minClose
and maxClose
network parameters.
Timestamp as Unix time in seconds when proposal gets enacted if passed,
constrained by minEnact
and maxEnact
network parameters.
newAsset object
Proposal change for creating new assets on Vega.
changes object
Configuration of the new asset.
builtinAsset object
Vega built-in asset.
Maximum amount that can be requested by a party through the built-in asset faucet at a time.
Number of decimal / precision handled by this asset.
erc20 object
Ethereum ERC20 asset.
Address of the contract for the token, on the ethereum network.
Lifetime limits deposit per address note: this is a temporary measure that can be changed by governance.
Maximum you can withdraw instantly. All withdrawals over the threshold will be delayed by the withdrawal delay. There’s no limit on the size of a withdrawal note: this is a temporary measure that can be changed by governance.
Name of the asset (e.g: Great British Pound).
Minimum economically meaningful amount in the asset.
Symbol of the asset (e.g: GBP).
Proposal change for a freeform request, which can be voted on but does not change the behaviour of the system, and can be used to gauge community sentiment.
newMarket object
Proposal change for creating new futures market on Vega.
changes object
Configuration of the new market.
Decimal places used for the new futures market, sets the smallest price increment on the book.
instrument object
New futures market instrument configuration.
Instrument code, human-readable shortcode used to describe the instrument.
future object
Future.
dataSourceSpecBinding object
Binding between the data source spec and the settlement data.
Name of the property in the source data that should be used as settlement data. If it is set to "prices.BTC.value", then the Future will use the value of this property as settlement data.
Name of the property in the data source data that signals termination of trading.
dataSourceSpecForSettlementData object
Data source spec describing the data source for settlement.
external object
DataSourceDefinitionExternal is the top level object used for all external
data sources. It contains one of any of the defined SourceType
variants.
ethOracle object
Contains the data specification that is received from Ethereum sources.
The ABI of that contract.
Ethereum address of the contract to call.
List of arguments to pass to method call. Protobuf 'Value' wraps an arbitrary JSON type that is mapped to an Ethereum type according to the ABI.
filters object[]
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
Name of the method on the contract to call.
normalisers object[]
Normalisers are used to convert the data returned from the contract method into a standard format. The key of the map is the name of the property, which identifies the specific piece of data to other parts of the data sourcing framework, for example filters. The value is a JSONPath expression for expressing where in the contract call result the required data is located, for example $[0] indicates the first result. $[1].price would look in the second result returned from the contract for a structure with a key called 'price' and use that if it exists.
trigger object
Conditions for determining when to call the contract method.
timeTrigger object
Trigger for an Ethereum call based on the Ethereum block timestamp. Can be one-off or repeating.
Repeat the call every n seconds after the initial call. If no time for initial call was specified, begin repeating immediately.
Trigger when the Ethereum time is greater or equal to this time, in Unix seconds.
If repeating, stop once Ethereum time is greater than this time, in Unix seconds. If not set, then repeat indefinitely.
oracle object
All types of external data sources use the same configuration set for meeting requirements in order for the data to be useful for Vega - valid signatures and matching filters.
filters object[]
Filters describes which source data are considered of interest or not for the product (or the risk model).
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
signers object[]
Signers is the list of authorized signatures that signed the data for this source. All the signatures in the data source data should be contained in this external source. All the signatures in the data should be contained in this list.
ethAddress object
In case of an open oracle - Ethereum address will be submitted.
pubKey object
List of authorized public keys that signed the data for this source. All the public keys in the data should be contained in these public keys.
internal object
Top level object used for all internal data sources. It contains one of any of the defined source type variants.
time object
Internal data source used for emitting timestamps.
conditions object[]
Conditions that the timestamps should meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
timeTrigger object
Internal data source used for emitting timestamps automatically using predefined intervals and conditions.
conditions object[]
Conditions that the timestamps need to meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
triggers object[]
Repeat the trigger every n seconds after the initial. If no time for initial was specified, begin repeating immediately.
Trigger when the vega time is greater or equal to this time, in Unix seconds.
dataSourceSpecForTradingTermination object
The external data source spec describing the data source of trading termination.
external object
DataSourceDefinitionExternal is the top level object used for all external
data sources. It contains one of any of the defined SourceType
variants.
ethOracle object
Contains the data specification that is received from Ethereum sources.
The ABI of that contract.
Ethereum address of the contract to call.
List of arguments to pass to method call. Protobuf 'Value' wraps an arbitrary JSON type that is mapped to an Ethereum type according to the ABI.
filters object[]
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
Name of the method on the contract to call.
normalisers object[]
Normalisers are used to convert the data returned from the contract method into a standard format. The key of the map is the name of the property, which identifies the specific piece of data to other parts of the data sourcing framework, for example filters. The value is a JSONPath expression for expressing where in the contract call result the required data is located, for example $[0] indicates the first result. $[1].price would look in the second result returned from the contract for a structure with a key called 'price' and use that if it exists.
trigger object
Conditions for determining when to call the contract method.
timeTrigger object
Trigger for an Ethereum call based on the Ethereum block timestamp. Can be one-off or repeating.
Repeat the call every n seconds after the initial call. If no time for initial call was specified, begin repeating immediately.
Trigger when the Ethereum time is greater or equal to this time, in Unix seconds.
If repeating, stop once Ethereum time is greater than this time, in Unix seconds. If not set, then repeat indefinitely.
oracle object
All types of external data sources use the same configuration set for meeting requirements in order for the data to be useful for Vega - valid signatures and matching filters.
filters object[]
Filters describes which source data are considered of interest or not for the product (or the risk model).
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
signers object[]
Signers is the list of authorized signatures that signed the data for this source. All the signatures in the data source data should be contained in this external source. All the signatures in the data should be contained in this list.
ethAddress object
In case of an open oracle - Ethereum address will be submitted.
pubKey object
List of authorized public keys that signed the data for this source. All the public keys in the data should be contained in these public keys.
internal object
Top level object used for all internal data sources. It contains one of any of the defined source type variants.
time object
Internal data source used for emitting timestamps.
conditions object[]
Conditions that the timestamps should meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
timeTrigger object
Internal data source used for emitting timestamps automatically using predefined intervals and conditions.
conditions object[]
Conditions that the timestamps need to meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
triggers object[]
Repeat the trigger every n seconds after the initial. If no time for initial was specified, begin repeating immediately.
Trigger when the vega time is greater or equal to this time, in Unix seconds.
Product quote name.
Asset ID for the product's settlement asset.
Instrument name.
perpetual object
Perpetual.
Lower bound for the clamp function used as part of the funding rate calculation, in the range [-1, 1].
Upper bound for the clamp function used as part of the funding rate calculation, in the range [-1, 1].
dataSourceSpecBinding object
Binding between the data source spec and the settlement data.
Name of the property in the source data that should be used as settlement data. If it is set to "prices.BTC.value", then the perpetual market will use the value of this property as settlement data.
Name of the property in the source data that should be used as settlement data. If it is set to "prices.BTC.value", then the perpetual market will use the value of this property as settlement data.
dataSourceSpecForSettlementData object
Data source spec describing the data source for settlement.
external object
DataSourceDefinitionExternal is the top level object used for all external
data sources. It contains one of any of the defined SourceType
variants.
ethOracle object
Contains the data specification that is received from Ethereum sources.
The ABI of that contract.
Ethereum address of the contract to call.
List of arguments to pass to method call. Protobuf 'Value' wraps an arbitrary JSON type that is mapped to an Ethereum type according to the ABI.
filters object[]
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
Name of the method on the contract to call.
normalisers object[]
Normalisers are used to convert the data returned from the contract method into a standard format. The key of the map is the name of the property, which identifies the specific piece of data to other parts of the data sourcing framework, for example filters. The value is a JSONPath expression for expressing where in the contract call result the required data is located, for example $[0] indicates the first result. $[1].price would look in the second result returned from the contract for a structure with a key called 'price' and use that if it exists.
trigger object
Conditions for determining when to call the contract method.
timeTrigger object
Trigger for an Ethereum call based on the Ethereum block timestamp. Can be one-off or repeating.
Repeat the call every n seconds after the initial call. If no time for initial call was specified, begin repeating immediately.
Trigger when the Ethereum time is greater or equal to this time, in Unix seconds.
If repeating, stop once Ethereum time is greater than this time, in Unix seconds. If not set, then repeat indefinitely.
oracle object
All types of external data sources use the same configuration set for meeting requirements in order for the data to be useful for Vega - valid signatures and matching filters.
filters object[]
Filters describes which source data are considered of interest or not for the product (or the risk model).
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
signers object[]
Signers is the list of authorized signatures that signed the data for this source. All the signatures in the data source data should be contained in this external source. All the signatures in the data should be contained in this list.
ethAddress object
In case of an open oracle - Ethereum address will be submitted.
pubKey object
List of authorized public keys that signed the data for this source. All the public keys in the data should be contained in these public keys.
internal object
Top level object used for all internal data sources. It contains one of any of the defined source type variants.
time object
Internal data source used for emitting timestamps.
conditions object[]
Conditions that the timestamps should meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
timeTrigger object
Internal data source used for emitting timestamps automatically using predefined intervals and conditions.
conditions object[]
Conditions that the timestamps need to meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
triggers object[]
Repeat the trigger every n seconds after the initial. If no time for initial was specified, begin repeating immediately.
Trigger when the vega time is greater or equal to this time, in Unix seconds.
dataSourceSpecForSettlementSchedule object
Data source spec describing the data source for settlement schedule.
external object
DataSourceDefinitionExternal is the top level object used for all external
data sources. It contains one of any of the defined SourceType
variants.
ethOracle object
Contains the data specification that is received from Ethereum sources.
The ABI of that contract.
Ethereum address of the contract to call.
List of arguments to pass to method call. Protobuf 'Value' wraps an arbitrary JSON type that is mapped to an Ethereum type according to the ABI.
filters object[]
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
Name of the method on the contract to call.
normalisers object[]
Normalisers are used to convert the data returned from the contract method into a standard format. The key of the map is the name of the property, which identifies the specific piece of data to other parts of the data sourcing framework, for example filters. The value is a JSONPath expression for expressing where in the contract call result the required data is located, for example $[0] indicates the first result. $[1].price would look in the second result returned from the contract for a structure with a key called 'price' and use that if it exists.
trigger object
Conditions for determining when to call the contract method.
timeTrigger object
Trigger for an Ethereum call based on the Ethereum block timestamp. Can be one-off or repeating.
Repeat the call every n seconds after the initial call. If no time for initial call was specified, begin repeating immediately.
Trigger when the Ethereum time is greater or equal to this time, in Unix seconds.
If repeating, stop once Ethereum time is greater than this time, in Unix seconds. If not set, then repeat indefinitely.
oracle object
All types of external data sources use the same configuration set for meeting requirements in order for the data to be useful for Vega - valid signatures and matching filters.
filters object[]
Filters describes which source data are considered of interest or not for the product (or the risk model).
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
signers object[]
Signers is the list of authorized signatures that signed the data for this source. All the signatures in the data source data should be contained in this external source. All the signatures in the data should be contained in this list.
ethAddress object
In case of an open oracle - Ethereum address will be submitted.
pubKey object
List of authorized public keys that signed the data for this source. All the public keys in the data should be contained in these public keys.
internal object
Top level object used for all internal data sources. It contains one of any of the defined source type variants.
time object
Internal data source used for emitting timestamps.
conditions object[]
Conditions that the timestamps should meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
timeTrigger object
Internal data source used for emitting timestamps automatically using predefined intervals and conditions.
conditions object[]
Conditions that the timestamps need to meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
triggers object[]
Repeat the trigger every n seconds after the initial. If no time for initial was specified, begin repeating immediately.
Trigger when the vega time is greater or equal to this time, in Unix seconds.
Continuously compounded interest rate used in funding rate calculation, in the range [-1, 1].
Controls how much the upcoming funding payment liability contributes to party's margin, in the range [0, 1].
Product quote name.
Asset ID for the product's settlement asset.
spot object
Spot.
Base asset ID.
Product name.
Quote asset ID.
Linear slippage factor is used to cap the slippage component of maintenance margin - it is applied to the slippage volume.
liquidityMonitoringParameters object
Liquidity monitoring parameters.
Specifies by how many seconds an auction should be extended if leaving the auction were to trigger a liquidity auction.
targetStakeParameters object
Specifies parameters related to target stake calculation.
Specifies scaling factors used in target stake calculation.
Specifies length of time window expressed in seconds for target stake calculation.
Specifies the triggering ratio for entering liquidity auction.
liquiditySlaParameters object
Specifies the minimum fraction of time LPs must spend "on the book" providing their committed liquidity.
Specifies the number of liquidity epochs over which past performance will continue to affect rewards.
Specifies the maximum fraction of their accrued fees an LP that meets the SLA implied by market.liquidity.commitmentMinTimeFraction will lose to liquidity providers that achieved a higher SLA performance than them.
logNormal object
Log normal risk model parameters, valid only if MODEL_LOG_NORMAL is selected.
params object
Risk model parameters for log normal.
Mu parameter, annualised growth rate of the underlying asset.
R parameter, annualised growth rate of the risk-free asset, used for discounting of future cash flows, can be any real number.
Sigma parameter, annualised volatility of the underlying asset, must be a strictly non-negative real number.
Risk Aversion Parameter.
Tau parameter of the risk model, projection horizon measured as a year fraction used in the expected shortfall calculation to obtain the maintenance margin, must be a strictly non-negative real number.
DEPRECATED: Use liquidity SLA parameters instead. Percentage move up and down from the mid price which specifies the range of price levels over which automated liquidity provisions will be deployed.
Optional new futures market metadata, tags.
Decimal places for order sizes, sets what size the smallest order / position on the futures market can be.
priceMonitoringParameters object
Price monitoring parameters.
triggers object[]
Price monitoring auction extension duration in seconds should the price breach its theoretical level over the specified horizon at the specified probability level.
Price monitoring projection horizon τ in seconds.
Price monitoring probability level p.
Quadratic slippage factor is used to cap the slippage component of maintenance margin - it is applied to the square of the slippage volume.
simple object
Simple risk model parameters, valid only if MODEL_SIMPLE is selected.
Pre-defined risk factor value for long.
Pre-defined risk factor value for short.
Pre-defined maximum price move up that the model considers as valid.
Pre-defined minimum price move down that the model considers as valid.
Pre-defined constant probability of trading.
successor object
Successor configuration. If this proposal is meant to succeed a given market, then this should be set.
A decimal value between or equal to 0 and 1, specifying the fraction of the insurance pool balance that is carried over from the parent market to the successor.
ID of the market that the successor should take over from.
newSpotMarket object
Proposal change for creating new spot market on Vega.
changes object
Configuration of the new spot market.
Decimal places used for the new spot market, sets the smallest price increment on the book.
instrument object
New spot market instrument configuration.
Instrument code, human-readable shortcode used to describe the instrument.
future object
Future.
dataSourceSpecBinding object
Binding between the data source spec and the settlement data.
Name of the property in the source data that should be used as settlement data. If it is set to "prices.BTC.value", then the Future will use the value of this property as settlement data.
Name of the property in the data source data that signals termination of trading.
dataSourceSpecForSettlementData object
Data source spec describing the data source for settlement.
external object
DataSourceDefinitionExternal is the top level object used for all external
data sources. It contains one of any of the defined SourceType
variants.
ethOracle object
Contains the data specification that is received from Ethereum sources.
The ABI of that contract.
Ethereum address of the contract to call.
List of arguments to pass to method call. Protobuf 'Value' wraps an arbitrary JSON type that is mapped to an Ethereum type according to the ABI.
filters object[]
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
Name of the method on the contract to call.
normalisers object[]
Normalisers are used to convert the data returned from the contract method into a standard format. The key of the map is the name of the property, which identifies the specific piece of data to other parts of the data sourcing framework, for example filters. The value is a JSONPath expression for expressing where in the contract call result the required data is located, for example $[0] indicates the first result. $[1].price would look in the second result returned from the contract for a structure with a key called 'price' and use that if it exists.
trigger object
Conditions for determining when to call the contract method.
timeTrigger object
Trigger for an Ethereum call based on the Ethereum block timestamp. Can be one-off or repeating.
Repeat the call every n seconds after the initial call. If no time for initial call was specified, begin repeating immediately.
Trigger when the Ethereum time is greater or equal to this time, in Unix seconds.
If repeating, stop once Ethereum time is greater than this time, in Unix seconds. If not set, then repeat indefinitely.
oracle object
All types of external data sources use the same configuration set for meeting requirements in order for the data to be useful for Vega - valid signatures and matching filters.
filters object[]
Filters describes which source data are considered of interest or not for the product (or the risk model).
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
signers object[]
Signers is the list of authorized signatures that signed the data for this source. All the signatures in the data source data should be contained in this external source. All the signatures in the data should be contained in this list.
ethAddress object
In case of an open oracle - Ethereum address will be submitted.
pubKey object
List of authorized public keys that signed the data for this source. All the public keys in the data should be contained in these public keys.
internal object
Top level object used for all internal data sources. It contains one of any of the defined source type variants.
time object
Internal data source used for emitting timestamps.
conditions object[]
Conditions that the timestamps should meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
timeTrigger object
Internal data source used for emitting timestamps automatically using predefined intervals and conditions.
conditions object[]
Conditions that the timestamps need to meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
triggers object[]
Repeat the trigger every n seconds after the initial. If no time for initial was specified, begin repeating immediately.
Trigger when the vega time is greater or equal to this time, in Unix seconds.
dataSourceSpecForTradingTermination object
The external data source spec describing the data source of trading termination.
external object
DataSourceDefinitionExternal is the top level object used for all external
data sources. It contains one of any of the defined SourceType
variants.
ethOracle object
Contains the data specification that is received from Ethereum sources.
The ABI of that contract.
Ethereum address of the contract to call.
List of arguments to pass to method call. Protobuf 'Value' wraps an arbitrary JSON type that is mapped to an Ethereum type according to the ABI.
filters object[]
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
Name of the method on the contract to call.
normalisers object[]
Normalisers are used to convert the data returned from the contract method into a standard format. The key of the map is the name of the property, which identifies the specific piece of data to other parts of the data sourcing framework, for example filters. The value is a JSONPath expression for expressing where in the contract call result the required data is located, for example $[0] indicates the first result. $[1].price would look in the second result returned from the contract for a structure with a key called 'price' and use that if it exists.
trigger object
Conditions for determining when to call the contract method.
timeTrigger object
Trigger for an Ethereum call based on the Ethereum block timestamp. Can be one-off or repeating.
Repeat the call every n seconds after the initial call. If no time for initial call was specified, begin repeating immediately.
Trigger when the Ethereum time is greater or equal to this time, in Unix seconds.
If repeating, stop once Ethereum time is greater than this time, in Unix seconds. If not set, then repeat indefinitely.
oracle object
All types of external data sources use the same configuration set for meeting requirements in order for the data to be useful for Vega - valid signatures and matching filters.
filters object[]
Filters describes which source data are considered of interest or not for the product (or the risk model).
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
signers object[]
Signers is the list of authorized signatures that signed the data for this source. All the signatures in the data source data should be contained in this external source. All the signatures in the data should be contained in this list.
ethAddress object
In case of an open oracle - Ethereum address will be submitted.
pubKey object
List of authorized public keys that signed the data for this source. All the public keys in the data should be contained in these public keys.
internal object
Top level object used for all internal data sources. It contains one of any of the defined source type variants.
time object
Internal data source used for emitting timestamps.
conditions object[]
Conditions that the timestamps should meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
timeTrigger object
Internal data source used for emitting timestamps automatically using predefined intervals and conditions.
conditions object[]
Conditions that the timestamps need to meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
triggers object[]
Repeat the trigger every n seconds after the initial. If no time for initial was specified, begin repeating immediately.
Trigger when the vega time is greater or equal to this time, in Unix seconds.
Product quote name.
Asset ID for the product's settlement asset.
Instrument name.
perpetual object
Perpetual.
Lower bound for the clamp function used as part of the funding rate calculation, in the range [-1, 1].
Upper bound for the clamp function used as part of the funding rate calculation, in the range [-1, 1].
dataSourceSpecBinding object
Binding between the data source spec and the settlement data.
Name of the property in the source data that should be used as settlement data. If it is set to "prices.BTC.value", then the perpetual market will use the value of this property as settlement data.
Name of the property in the source data that should be used as settlement data. If it is set to "prices.BTC.value", then the perpetual market will use the value of this property as settlement data.
dataSourceSpecForSettlementData object
Data source spec describing the data source for settlement.
external object
DataSourceDefinitionExternal is the top level object used for all external
data sources. It contains one of any of the defined SourceType
variants.
ethOracle object
Contains the data specification that is received from Ethereum sources.
The ABI of that contract.
Ethereum address of the contract to call.
List of arguments to pass to method call. Protobuf 'Value' wraps an arbitrary JSON type that is mapped to an Ethereum type according to the ABI.
filters object[]
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
Name of the method on the contract to call.
normalisers object[]
Normalisers are used to convert the data returned from the contract method into a standard format. The key of the map is the name of the property, which identifies the specific piece of data to other parts of the data sourcing framework, for example filters. The value is a JSONPath expression for expressing where in the contract call result the required data is located, for example $[0] indicates the first result. $[1].price would look in the second result returned from the contract for a structure with a key called 'price' and use that if it exists.
trigger object
Conditions for determining when to call the contract method.
timeTrigger object
Trigger for an Ethereum call based on the Ethereum block timestamp. Can be one-off or repeating.
Repeat the call every n seconds after the initial call. If no time for initial call was specified, begin repeating immediately.
Trigger when the Ethereum time is greater or equal to this time, in Unix seconds.
If repeating, stop once Ethereum time is greater than this time, in Unix seconds. If not set, then repeat indefinitely.
oracle object
All types of external data sources use the same configuration set for meeting requirements in order for the data to be useful for Vega - valid signatures and matching filters.
filters object[]
Filters describes which source data are considered of interest or not for the product (or the risk model).
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
signers object[]
Signers is the list of authorized signatures that signed the data for this source. All the signatures in the data source data should be contained in this external source. All the signatures in the data should be contained in this list.
ethAddress object
In case of an open oracle - Ethereum address will be submitted.
pubKey object
List of authorized public keys that signed the data for this source. All the public keys in the data should be contained in these public keys.
internal object
Top level object used for all internal data sources. It contains one of any of the defined source type variants.
time object
Internal data source used for emitting timestamps.
conditions object[]
Conditions that the timestamps should meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
timeTrigger object
Internal data source used for emitting timestamps automatically using predefined intervals and conditions.
conditions object[]
Conditions that the timestamps need to meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
triggers object[]
Repeat the trigger every n seconds after the initial. If no time for initial was specified, begin repeating immediately.
Trigger when the vega time is greater or equal to this time, in Unix seconds.
dataSourceSpecForSettlementSchedule object
Data source spec describing the data source for settlement schedule.
external object
DataSourceDefinitionExternal is the top level object used for all external
data sources. It contains one of any of the defined SourceType
variants.
ethOracle object
Contains the data specification that is received from Ethereum sources.
The ABI of that contract.
Ethereum address of the contract to call.
List of arguments to pass to method call. Protobuf 'Value' wraps an arbitrary JSON type that is mapped to an Ethereum type according to the ABI.
filters object[]
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
Name of the method on the contract to call.
normalisers object[]
Normalisers are used to convert the data returned from the contract method into a standard format. The key of the map is the name of the property, which identifies the specific piece of data to other parts of the data sourcing framework, for example filters. The value is a JSONPath expression for expressing where in the contract call result the required data is located, for example $[0] indicates the first result. $[1].price would look in the second result returned from the contract for a structure with a key called 'price' and use that if it exists.
trigger object
Conditions for determining when to call the contract method.
timeTrigger object
Trigger for an Ethereum call based on the Ethereum block timestamp. Can be one-off or repeating.
Repeat the call every n seconds after the initial call. If no time for initial call was specified, begin repeating immediately.
Trigger when the Ethereum time is greater or equal to this time, in Unix seconds.
If repeating, stop once Ethereum time is greater than this time, in Unix seconds. If not set, then repeat indefinitely.
oracle object
All types of external data sources use the same configuration set for meeting requirements in order for the data to be useful for Vega - valid signatures and matching filters.
filters object[]
Filters describes which source data are considered of interest or not for the product (or the risk model).
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
signers object[]
Signers is the list of authorized signatures that signed the data for this source. All the signatures in the data source data should be contained in this external source. All the signatures in the data should be contained in this list.
ethAddress object
In case of an open oracle - Ethereum address will be submitted.
pubKey object
List of authorized public keys that signed the data for this source. All the public keys in the data should be contained in these public keys.
internal object
Top level object used for all internal data sources. It contains one of any of the defined source type variants.
time object
Internal data source used for emitting timestamps.
conditions object[]
Conditions that the timestamps should meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
timeTrigger object
Internal data source used for emitting timestamps automatically using predefined intervals and conditions.
conditions object[]
Conditions that the timestamps need to meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
triggers object[]
Repeat the trigger every n seconds after the initial. If no time for initial was specified, begin repeating immediately.
Trigger when the vega time is greater or equal to this time, in Unix seconds.
Continuously compounded interest rate used in funding rate calculation, in the range [-1, 1].
Controls how much the upcoming funding payment liability contributes to party's margin, in the range [0, 1].
Product quote name.
Asset ID for the product's settlement asset.
spot object
Spot.
Base asset ID.
Product name.
Quote asset ID.
logNormal object
Log normal risk model parameters, valid only if MODEL_LOG_NORMAL is selected.
params object
Risk model parameters for log normal.
Mu parameter, annualised growth rate of the underlying asset.
R parameter, annualised growth rate of the risk-free asset, used for discounting of future cash flows, can be any real number.
Sigma parameter, annualised volatility of the underlying asset, must be a strictly non-negative real number.
Risk Aversion Parameter.
Tau parameter of the risk model, projection horizon measured as a year fraction used in the expected shortfall calculation to obtain the maintenance margin, must be a strictly non-negative real number.
Optional new spot market metadata, tags.
Decimal places for order sizes, sets what size the smallest order / position on the spot market can be.
priceMonitoringParameters object
Price monitoring parameters.
triggers object[]
Price monitoring auction extension duration in seconds should the price breach its theoretical level over the specified horizon at the specified probability level.
Price monitoring projection horizon τ in seconds.
Price monitoring probability level p.
simple object
Simple risk model parameters, valid only if MODEL_SIMPLE is selected.
Pre-defined risk factor value for long.
Pre-defined risk factor value for short.
Pre-defined maximum price move up that the model considers as valid.
Pre-defined minimum price move down that the model considers as valid.
Pre-defined constant probability of trading.
slaParams object
Specifies the liquidity provision SLA parameters.
Specifies the minimum fraction of time LPs must spend "on the book" providing their committed liquidity.
Specifies the number of liquidity epochs over which past performance will continue to affect rewards.
Specifies the maximum fraction of their accrued fees an LP that meets the SLA implied by market.liquidity.commitmentMinTimeFraction will lose to liquidity providers that achieved a higher SLA performance than them.
targetStakeParameters object
Specifies parameters related to target stake calculation.
Specifies scaling factors used in target stake calculation.
Specifies length of time window expressed in seconds for target stake calculation.
newTransfer object
Proposal change for a governance transfer.
changes object
Configuration for a new transfer.
Possible values: [ACCOUNT_TYPE_UNSPECIFIED
, ACCOUNT_TYPE_INSURANCE
, ACCOUNT_TYPE_SETTLEMENT
, ACCOUNT_TYPE_MARGIN
, ACCOUNT_TYPE_GENERAL
, ACCOUNT_TYPE_FEES_INFRASTRUCTURE
, ACCOUNT_TYPE_FEES_LIQUIDITY
, ACCOUNT_TYPE_FEES_MAKER
, ACCOUNT_TYPE_BOND
, ACCOUNT_TYPE_EXTERNAL
, ACCOUNT_TYPE_GLOBAL_INSURANCE
, ACCOUNT_TYPE_GLOBAL_REWARD
, ACCOUNT_TYPE_PENDING_TRANSFERS
, ACCOUNT_TYPE_REWARD_MAKER_PAID_FEES
, ACCOUNT_TYPE_REWARD_MAKER_RECEIVED_FEES
, ACCOUNT_TYPE_REWARD_LP_RECEIVED_FEES
, ACCOUNT_TYPE_REWARD_MARKET_PROPOSERS
, ACCOUNT_TYPE_HOLDING
, ACCOUNT_TYPE_LP_LIQUIDITY_FEES
, ACCOUNT_TYPE_LIQUIDITY_FEES_BONUS_DISTRIBUTION
, ACCOUNT_TYPE_NETWORK_TREASURY
, ACCOUNT_TYPE_VESTING_REWARDS
, ACCOUNT_TYPE_VESTED_REWARDS
, ACCOUNT_TYPE_REWARD_AVERAGE_POSITION
, ACCOUNT_TYPE_REWARD_RELATIVE_RETURN
, ACCOUNT_TYPE_REWARD_RETURN_VOLATILITY
, ACCOUNT_TYPE_REWARD_VALIDATOR_RANKING
, ACCOUNT_TYPE_PENDING_FEE_REFERRAL_REWARD
]
Default value: ACCOUNT_TYPE_UNSPECIFIED
Margin account funds will vary as margin requirements on positions change
General accounts are where funds are initially deposited or withdrawn from, it is also the account where funds are taken to fulfil fees and initial margin requirements
oneOff object
Timestamp in Unix nanoseconds for when the transfer should be delivered into the receiver's account.
recurring object
dispatchStrategy object
Optional parameter defining how a transfer is dispatched.
Asset to use for metric.
Possible values: [DISTRIBUTION_STRATEGY_UNSPECIFIED
, DISTRIBUTION_STRATEGY_PRO_RATA
, DISTRIBUTION_STRATEGY_RANK
]
Default value: DISTRIBUTION_STRATEGY_UNSPECIFIED
Possible values: [ENTITY_SCOPE_UNSPECIFIED
, ENTITY_SCOPE_INDIVIDUALS
, ENTITY_SCOPE_TEAMS
]
Default value: ENTITY_SCOPE_UNSPECIFIED
Mandatory enum that defines the entities within scope.
Possible values: [INDIVIDUAL_SCOPE_UNSPECIFIED
, INDIVIDUAL_SCOPE_ALL
, INDIVIDUAL_SCOPE_IN_TEAM
, INDIVIDUAL_SCOPE_NOT_IN_TEAM
]
Default value: INDIVIDUAL_SCOPE_UNSPECIFIED
Optional enum if the entity scope defined is for individuals, which determines the subset of individuals that are eligible to be rewarded.
Optional markets in scope.
Possible values: [DISPATCH_METRIC_UNSPECIFIED
, DISPATCH_METRIC_MAKER_FEES_PAID
, DISPATCH_METRIC_MAKER_FEES_RECEIVED
, DISPATCH_METRIC_LP_FEES_RECEIVED
, DISPATCH_METRIC_MARKET_VALUE
, DISPATCH_METRIC_AVERAGE_POSITION
, DISPATCH_METRIC_RELATIVE_RETURN
, DISPATCH_METRIC_RETURN_VOLATILITY
, DISPATCH_METRIC_VALIDATOR_RANKING
]
Default value: DISPATCH_METRIC_UNSPECIFIED
Metric to apply.
rankTable object[]
Ordered list, using start rank, defining the rank bands and share ratio for each band. Mandatory for the rank distribution strategy.
Last epoch at which this transfer shall be paid.
Possible values: [ACCOUNT_TYPE_UNSPECIFIED
, ACCOUNT_TYPE_INSURANCE
, ACCOUNT_TYPE_SETTLEMENT
, ACCOUNT_TYPE_MARGIN
, ACCOUNT_TYPE_GENERAL
, ACCOUNT_TYPE_FEES_INFRASTRUCTURE
, ACCOUNT_TYPE_FEES_LIQUIDITY
, ACCOUNT_TYPE_FEES_MAKER
, ACCOUNT_TYPE_BOND
, ACCOUNT_TYPE_EXTERNAL
, ACCOUNT_TYPE_GLOBAL_INSURANCE
, ACCOUNT_TYPE_GLOBAL_REWARD
, ACCOUNT_TYPE_PENDING_TRANSFERS
, ACCOUNT_TYPE_REWARD_MAKER_PAID_FEES
, ACCOUNT_TYPE_REWARD_MAKER_RECEIVED_FEES
, ACCOUNT_TYPE_REWARD_LP_RECEIVED_FEES
, ACCOUNT_TYPE_REWARD_MARKET_PROPOSERS
, ACCOUNT_TYPE_HOLDING
, ACCOUNT_TYPE_LP_LIQUIDITY_FEES
, ACCOUNT_TYPE_LIQUIDITY_FEES_BONUS_DISTRIBUTION
, ACCOUNT_TYPE_NETWORK_TREASURY
, ACCOUNT_TYPE_VESTING_REWARDS
, ACCOUNT_TYPE_VESTED_REWARDS
, ACCOUNT_TYPE_REWARD_AVERAGE_POSITION
, ACCOUNT_TYPE_REWARD_RELATIVE_RETURN
, ACCOUNT_TYPE_REWARD_RETURN_VOLATILITY
, ACCOUNT_TYPE_REWARD_VALIDATOR_RANKING
, ACCOUNT_TYPE_PENDING_FEE_REFERRAL_REWARD
]
Default value: ACCOUNT_TYPE_UNSPECIFIED
Margin account funds will vary as margin requirements on positions change
General accounts are where funds are initially deposited or withdrawn from, it is also the account where funds are taken to fulfil fees and initial margin requirements
Possible values: [GOVERNANCE_TRANSFER_TYPE_UNSPECIFIED
, GOVERNANCE_TRANSFER_TYPE_ALL_OR_NOTHING
, GOVERNANCE_TRANSFER_TYPE_BEST_EFFORT
]
Default value: GOVERNANCE_TRANSFER_TYPE_UNSPECIFIED
updateAsset object
Proposal change for updating an asset.
Asset ID the update is for.
changes object
Changes to apply on an existing asset.
erc20 object
Ethereum ERC20 asset update.
Lifetime limits deposit per address. This will be interpreted against the asset decimals. note: this is a temporary measure that can be changed by governance.
Maximum you can withdraw instantly. All withdrawals over the threshold will be delayed by the withdrawal delay. There’s no limit on the size of a withdrawal note: this is a temporary measure that can be changed by governance.
Minimum economically meaningful amount in the asset.
updateMarket object
Proposal change for modifying an existing futures market on Vega.
changes object
Updated configuration of the futures market.
instrument object
Updated futures market instrument configuration.
Instrument code, human-readable shortcode used to describe the instrument.
future object
Future.
dataSourceSpecBinding object
The binding between the data source spec and the settlement data.
Name of the property in the source data that should be used as settlement data. If it is set to "prices.BTC.value", then the Future will use the value of this property as settlement data.
Name of the property in the data source data that signals termination of trading.
dataSourceSpecForSettlementData object
The data source spec describing the data of settlement data.
external object
DataSourceDefinitionExternal is the top level object used for all external
data sources. It contains one of any of the defined SourceType
variants.
ethOracle object
Contains the data specification that is received from Ethereum sources.
The ABI of that contract.
Ethereum address of the contract to call.
List of arguments to pass to method call. Protobuf 'Value' wraps an arbitrary JSON type that is mapped to an Ethereum type according to the ABI.
filters object[]
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
Name of the method on the contract to call.
normalisers object[]
Normalisers are used to convert the data returned from the contract method into a standard format. The key of the map is the name of the property, which identifies the specific piece of data to other parts of the data sourcing framework, for example filters. The value is a JSONPath expression for expressing where in the contract call result the required data is located, for example $[0] indicates the first result. $[1].price would look in the second result returned from the contract for a structure with a key called 'price' and use that if it exists.
trigger object
Conditions for determining when to call the contract method.
timeTrigger object
Trigger for an Ethereum call based on the Ethereum block timestamp. Can be one-off or repeating.
Repeat the call every n seconds after the initial call. If no time for initial call was specified, begin repeating immediately.
Trigger when the Ethereum time is greater or equal to this time, in Unix seconds.
If repeating, stop once Ethereum time is greater than this time, in Unix seconds. If not set, then repeat indefinitely.
oracle object
All types of external data sources use the same configuration set for meeting requirements in order for the data to be useful for Vega - valid signatures and matching filters.
filters object[]
Filters describes which source data are considered of interest or not for the product (or the risk model).
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
signers object[]
Signers is the list of authorized signatures that signed the data for this source. All the signatures in the data source data should be contained in this external source. All the signatures in the data should be contained in this list.
ethAddress object
In case of an open oracle - Ethereum address will be submitted.
pubKey object
List of authorized public keys that signed the data for this source. All the public keys in the data should be contained in these public keys.
internal object
Top level object used for all internal data sources. It contains one of any of the defined source type variants.
time object
Internal data source used for emitting timestamps.
conditions object[]
Conditions that the timestamps should meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
timeTrigger object
Internal data source used for emitting timestamps automatically using predefined intervals and conditions.
conditions object[]
Conditions that the timestamps need to meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
triggers object[]
Repeat the trigger every n seconds after the initial. If no time for initial was specified, begin repeating immediately.
Trigger when the vega time is greater or equal to this time, in Unix seconds.
dataSourceSpecForTradingTermination object
The data source spec describing the data source for trading termination.
external object
DataSourceDefinitionExternal is the top level object used for all external
data sources. It contains one of any of the defined SourceType
variants.
ethOracle object
Contains the data specification that is received from Ethereum sources.
The ABI of that contract.
Ethereum address of the contract to call.
List of arguments to pass to method call. Protobuf 'Value' wraps an arbitrary JSON type that is mapped to an Ethereum type according to the ABI.
filters object[]
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
Name of the method on the contract to call.
normalisers object[]
Normalisers are used to convert the data returned from the contract method into a standard format. The key of the map is the name of the property, which identifies the specific piece of data to other parts of the data sourcing framework, for example filters. The value is a JSONPath expression for expressing where in the contract call result the required data is located, for example $[0] indicates the first result. $[1].price would look in the second result returned from the contract for a structure with a key called 'price' and use that if it exists.
trigger object
Conditions for determining when to call the contract method.
timeTrigger object
Trigger for an Ethereum call based on the Ethereum block timestamp. Can be one-off or repeating.
Repeat the call every n seconds after the initial call. If no time for initial call was specified, begin repeating immediately.
Trigger when the Ethereum time is greater or equal to this time, in Unix seconds.
If repeating, stop once Ethereum time is greater than this time, in Unix seconds. If not set, then repeat indefinitely.
oracle object
All types of external data sources use the same configuration set for meeting requirements in order for the data to be useful for Vega - valid signatures and matching filters.
filters object[]
Filters describes which source data are considered of interest or not for the product (or the risk model).
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
signers object[]
Signers is the list of authorized signatures that signed the data for this source. All the signatures in the data source data should be contained in this external source. All the signatures in the data should be contained in this list.
ethAddress object
In case of an open oracle - Ethereum address will be submitted.
pubKey object
List of authorized public keys that signed the data for this source. All the public keys in the data should be contained in these public keys.
internal object
Top level object used for all internal data sources. It contains one of any of the defined source type variants.
time object
Internal data source used for emitting timestamps.
conditions object[]
Conditions that the timestamps should meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
timeTrigger object
Internal data source used for emitting timestamps automatically using predefined intervals and conditions.
conditions object[]
Conditions that the timestamps need to meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
triggers object[]
Repeat the trigger every n seconds after the initial. If no time for initial was specified, begin repeating immediately.
Trigger when the vega time is greater or equal to this time, in Unix seconds.
Human-readable name/abbreviation of the quote name.
perpetual object
Perpetual.
Lower bound for the clamp function used as part of the funding rate calculation, in the range [-1, 1].
Upper bound for the clamp function used as part of the funding rate calculation, in the range [-1, 1].
dataSourceSpecBinding object
Binding between the data source spec and the settlement data.
Name of the property in the source data that should be used as settlement data. If it is set to "prices.BTC.value", then the perpetual market will use the value of this property as settlement data.
Name of the property in the source data that should be used as settlement data. If it is set to "prices.BTC.value", then the perpetual market will use the value of this property as settlement data.
dataSourceSpecForSettlementData object
Data source spec describing the data source for settlement.
external object
DataSourceDefinitionExternal is the top level object used for all external
data sources. It contains one of any of the defined SourceType
variants.
ethOracle object
Contains the data specification that is received from Ethereum sources.
The ABI of that contract.
Ethereum address of the contract to call.
List of arguments to pass to method call. Protobuf 'Value' wraps an arbitrary JSON type that is mapped to an Ethereum type according to the ABI.
filters object[]
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
Name of the method on the contract to call.
normalisers object[]
Normalisers are used to convert the data returned from the contract method into a standard format. The key of the map is the name of the property, which identifies the specific piece of data to other parts of the data sourcing framework, for example filters. The value is a JSONPath expression for expressing where in the contract call result the required data is located, for example $[0] indicates the first result. $[1].price would look in the second result returned from the contract for a structure with a key called 'price' and use that if it exists.
trigger object
Conditions for determining when to call the contract method.
timeTrigger object
Trigger for an Ethereum call based on the Ethereum block timestamp. Can be one-off or repeating.
Repeat the call every n seconds after the initial call. If no time for initial call was specified, begin repeating immediately.
Trigger when the Ethereum time is greater or equal to this time, in Unix seconds.
If repeating, stop once Ethereum time is greater than this time, in Unix seconds. If not set, then repeat indefinitely.
oracle object
All types of external data sources use the same configuration set for meeting requirements in order for the data to be useful for Vega - valid signatures and matching filters.
filters object[]
Filters describes which source data are considered of interest or not for the product (or the risk model).
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
signers object[]
Signers is the list of authorized signatures that signed the data for this source. All the signatures in the data source data should be contained in this external source. All the signatures in the data should be contained in this list.
ethAddress object
In case of an open oracle - Ethereum address will be submitted.
pubKey object
List of authorized public keys that signed the data for this source. All the public keys in the data should be contained in these public keys.
internal object
Top level object used for all internal data sources. It contains one of any of the defined source type variants.
time object
Internal data source used for emitting timestamps.
conditions object[]
Conditions that the timestamps should meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
timeTrigger object
Internal data source used for emitting timestamps automatically using predefined intervals and conditions.
conditions object[]
Conditions that the timestamps need to meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
triggers object[]
Repeat the trigger every n seconds after the initial. If no time for initial was specified, begin repeating immediately.
Trigger when the vega time is greater or equal to this time, in Unix seconds.
dataSourceSpecForSettlementSchedule object
Data source spec describing the data source for settlement schedule.
external object
DataSourceDefinitionExternal is the top level object used for all external
data sources. It contains one of any of the defined SourceType
variants.
ethOracle object
Contains the data specification that is received from Ethereum sources.
The ABI of that contract.
Ethereum address of the contract to call.
List of arguments to pass to method call. Protobuf 'Value' wraps an arbitrary JSON type that is mapped to an Ethereum type according to the ABI.
filters object[]
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
Name of the method on the contract to call.
normalisers object[]
Normalisers are used to convert the data returned from the contract method into a standard format. The key of the map is the name of the property, which identifies the specific piece of data to other parts of the data sourcing framework, for example filters. The value is a JSONPath expression for expressing where in the contract call result the required data is located, for example $[0] indicates the first result. $[1].price would look in the second result returned from the contract for a structure with a key called 'price' and use that if it exists.
trigger object
Conditions for determining when to call the contract method.
timeTrigger object
Trigger for an Ethereum call based on the Ethereum block timestamp. Can be one-off or repeating.
Repeat the call every n seconds after the initial call. If no time for initial call was specified, begin repeating immediately.
Trigger when the Ethereum time is greater or equal to this time, in Unix seconds.
If repeating, stop once Ethereum time is greater than this time, in Unix seconds. If not set, then repeat indefinitely.
oracle object
All types of external data sources use the same configuration set for meeting requirements in order for the data to be useful for Vega - valid signatures and matching filters.
filters object[]
Filters describes which source data are considered of interest or not for the product (or the risk model).
conditions object[]
Conditions that should be matched by the data to be considered of interest.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
key object
Data source's data property key targeted by the filter.
Name of the property.
Possible values: [TYPE_UNSPECIFIED
, TYPE_EMPTY
, TYPE_INTEGER
, TYPE_STRING
, TYPE_BOOLEAN
, TYPE_DECIMAL
, TYPE_TIMESTAMP
]
Default value: TYPE_UNSPECIFIED
Data type of the property.
signers object[]
Signers is the list of authorized signatures that signed the data for this source. All the signatures in the data source data should be contained in this external source. All the signatures in the data should be contained in this list.
ethAddress object
In case of an open oracle - Ethereum address will be submitted.
pubKey object
List of authorized public keys that signed the data for this source. All the public keys in the data should be contained in these public keys.
internal object
Top level object used for all internal data sources. It contains one of any of the defined source type variants.
time object
Internal data source used for emitting timestamps.
conditions object[]
Conditions that the timestamps should meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
timeTrigger object
Internal data source used for emitting timestamps automatically using predefined intervals and conditions.
conditions object[]
Conditions that the timestamps need to meet in order to be considered.
Possible values: [OPERATOR_UNSPECIFIED
, OPERATOR_EQUALS
, OPERATOR_GREATER_THAN
, OPERATOR_GREATER_THAN_OR_EQUAL
, OPERATOR_LESS_THAN
, OPERATOR_LESS_THAN_OR_EQUAL
]
Default value: OPERATOR_UNSPECIFIED
Type of comparison to make on the value.
Value to be compared with by the operator.
triggers object[]
Repeat the trigger every n seconds after the initial. If no time for initial was specified, begin repeating immediately.
Trigger when the vega time is greater or equal to this time, in Unix seconds.
Continuously compounded interest rate used in funding rate calculation, in the range [-1, 1].
Controls how much the upcoming funding payment liability contributes to party's margin, in the range [0, 1].
Human-readable name/abbreviation of the quote name.
Linear slippage factor is used to cap the slippage component of maintenance margin - it is applied to the slippage volume.
liquidityMonitoringParameters object
Liquidity monitoring parameters.
Specifies by how many seconds an auction should be extended if leaving the auction were to trigger a liquidity auction.
targetStakeParameters object
Specifies parameters related to target stake calculation.
Specifies scaling factors used in target stake calculation.
Specifies length of time window expressed in seconds for target stake calculation.
Specifies the triggering ratio for entering liquidity auction.
liquiditySlaParameters object
Specifies the minimum fraction of time LPs must spend "on the book" providing their committed liquidity.
Specifies the number of liquidity epochs over which past performance will continue to affect rewards.
Specifies the maximum fraction of their accrued fees an LP that meets the SLA implied by market.liquidity.commitmentMinTimeFraction will lose to liquidity providers that achieved a higher SLA performance than them.
logNormal object
Log normal risk model parameters, valid only if MODEL_LOG_NORMAL is selected.
params object
Risk model parameters for log normal.
Mu parameter, annualised growth rate of the underlying asset.
R parameter, annualised growth rate of the risk-free asset, used for discounting of future cash flows, can be any real number.
Sigma parameter, annualised volatility of the underlying asset, must be a strictly non-negative real number.
Risk Aversion Parameter.
Tau parameter of the risk model, projection horizon measured as a year fraction used in the expected shortfall calculation to obtain the maintenance margin, must be a strictly non-negative real number.
DEPRECATED: Use liquidity SLA parameters instead. Percentage move up and down from the mid price which specifies the range of price levels over which automated liquidity provisions will be deployed.
Optional futures market metadata, tags.
priceMonitoringParameters object
Price monitoring parameters.
triggers object[]
Price monitoring auction extension duration in seconds should the price breach its theoretical level over the specified horizon at the specified probability level.
Price monitoring projection horizon τ in seconds.
Price monitoring probability level p.
Quadratic slippage factor is used to cap the slippage component of maintenance margin - it is applied to the square of the slippage volume.
simple object
Simple risk model parameters, valid only if MODEL_SIMPLE is selected.
Pre-defined risk factor value for long.
Pre-defined risk factor value for short.
Pre-defined maximum price move up that the model considers as valid.
Pre-defined minimum price move down that the model considers as valid.
Pre-defined constant probability of trading.
Market ID the update is for.
updateMarketState object
Proposal change for updating the state of a market.
changes object
Possible values: [MARKET_STATE_UPDATE_TYPE_UNSPECIFIED
, MARKET_STATE_UPDATE_TYPE_TERMINATE
, MARKET_STATE_UPDATE_TYPE_SUSPEND
, MARKET_STATE_UPDATE_TYPE_RESUME
]
Default value: MARKET_STATE_UPDATE_TYPE_UNSPECIFIED
updateNetworkParameter object
Proposal change for updating Vega network parameters.
changes object
The network parameter to update.
Unique key of the network parameter.
Value for the network parameter.
updateReferralProgram object
Proposal change for updating the referral program.
changes object
Configuration for change to update a referral program.
benefitTiers object[]
Defined benefit tiers in increasing order. First element will give Tier 1, second element will give Tier 2, and so on. Determines the level of benefit a party can expect based on performance criteria.
Required number of epochs a party must have been in a referral set to access this tier.
Required running notional taker volume in quantum units for parties to access this tier.
Proportion of the referee's taker fees to be discounted.
Proportion of the referee's taker fees to be rewarded to the referrer.
Timestamp as Unix time in seconds, after which when the current epoch ends, the program will end and benefits will be disabled.
stakingTiers object[]
Defined staking tiers in increasing order. First element will give Tier 1, second element will give Tier 2, and so on. Determines the level of benefit a party can expect based on their staking.
Required number of governance tokens ($VEGA) a referrer must have staked to receive the multiplier.
Multiplier applied to the referral reward factor when calculating referral rewards due to the referrer.
Number of epochs over which to evaluate a referral set's running volume.
updateSpotMarket object
Proposal change for modifying an existing spot market on Vega.
changes object
Updated configuration of the spot market.
logNormal object
Log normal risk model parameters, valid only if MODEL_LOG_NORMAL is selected.
params object
Risk model parameters for log normal.
Mu parameter, annualised growth rate of the underlying asset.
R parameter, annualised growth rate of the risk-free asset, used for discounting of future cash flows, can be any real number.
Sigma parameter, annualised volatility of the underlying asset, must be a strictly non-negative real number.
Risk Aversion Parameter.
Tau parameter of the risk model, projection horizon measured as a year fraction used in the expected shortfall calculation to obtain the maintenance margin, must be a strictly non-negative real number.
Optional spot market metadata, tags.
priceMonitoringParameters object
Price monitoring parameters.
triggers object[]
Price monitoring auction extension duration in seconds should the price breach its theoretical level over the specified horizon at the specified probability level.
Price monitoring projection horizon τ in seconds.
Price monitoring probability level p.
simple object
Simple risk model parameters, valid only if MODEL_SIMPLE is selected.
Pre-defined risk factor value for long.
Pre-defined risk factor value for short.
Pre-defined maximum price move up that the model considers as valid.
Pre-defined minimum price move down that the model considers as valid.
Pre-defined constant probability of trading.
slaParams object
Specifies the liquidity provision SLA parameters.
Specifies the minimum fraction of time LPs must spend "on the book" providing their committed liquidity.
Specifies the number of liquidity epochs over which past performance will continue to affect rewards.
Specifies the maximum fraction of their accrued fees an LP that meets the SLA implied by market.liquidity.commitmentMinTimeFraction will lose to liquidity providers that achieved a higher SLA performance than them.
targetStakeParameters object
Specifies parameters related to target stake calculation.
Specifies scaling factors used in target stake calculation.
Specifies length of time window expressed in seconds for target stake calculation.
Market ID the update is for.
updateVolumeDiscountProgram object
Proposal change for updating the volume discount program.
changes object
benefitTiers object[]
Defined benefit tiers in increasing order. First element will give Tier 1, second element will give Tier 2, and so on. Determines the level of benefit a party can expect based on performance criteria.
Required running notional taker volume in quantum units for parties to access this tier.
Proportion of the taker fees to be discounted.
Timestamp as Unix time in seconds, after which when the current epoch ends, the program will end and benefits will be disabled.
Number of epochs over which to evaluate a referral set's running volume.
Validation timestamp as Unix time in seconds.
protocolUpgradeProposal object
Validator command sent manually to propose a protocol upgrade.
Block height at which to perform the upgrade.
Release tag for the Vega binary.
stateVariableProposal object
Validator command sent automatically to reach consensus on floating point values.
proposal object
Details of the state variable being proposed.
Event ID.
kvb object[]
Key value tolerance triplets.
value object
matrixVal object
value object[]
scalarVal object
vectorVal object
State variable ID.
stopOrdersCancellation object
A command that instructs the network to cancel untriggered stop orders that were submitted by the sender of this transaction. If any cancelled stop order is part of an OCO, both stop orders will be cancelled. It is not possible to cancel another party's stop orders with this command.
Restrict cancellations to those submitted to the given market. If not set, all stop orders across all markets will be cancelled.
Restrict cancellations to a stop order with the given ID. If set, then a market ID must also be provided.
stopOrdersSubmission object
A command that allows a party to submit a stop order for a given market. A stop order is a normal order that remains off the order book and is only submitted if a given trigger is breached from a particular direction. If both rises-above and falls-below are configured, then if one is triggered the other will be cancelled (OCO).
fallsBelow object
Stop order that will be triggered if the price falls below a given trigger price.
Timestamp, in Unix nanoseconds, for when the stop order should expire. If not set the stop order will not expire.
Possible values: [EXPIRY_STRATEGY_UNSPECIFIED
, EXPIRY_STRATEGY_CANCELS
, EXPIRY_STRATEGY_SUBMIT
]
Default value: EXPIRY_STRATEGY_UNSPECIFIED
Strategy to adopt if the expiry time is reached.
orderSubmission object
Order to be submitted once the trigger is breached.
Timestamp, in Unix nanoseconds, for when the order will expire. Can only be set when the order's time-in-force is GTT.
icebergOpts object
Iceberg order details. If set, the order will exist on the order book in chunks.
Minimum allowed remaining size of the order before it is replenished back to its peak size.
Size of the order that is made visible and can be traded with during the execution of a single order.
Market ID to submit the order to.
peggedOrder object
Pegged order details. If set, the order's price will be offset from a particular reference price of the order book at all times.
Offset from the price reference.
Possible values: [PEGGED_REFERENCE_UNSPECIFIED
, PEGGED_REFERENCE_MID
, PEGGED_REFERENCE_BEST_BID
, PEGGED_REFERENCE_BEST_ASK
]
Default value: PEGGED_REFERENCE_UNSPECIFIED
Price point the order is linked to.
If set, the order will only be executed if it would not trade on entry to the order book. Only valid for limit orders.
Price for the order, the price is an integer, for example 123456
is a correctly
formatted price of 1.23456
assuming market configured to 5 decimal places,
required field for limit orders, however it is not required for market orders.
This field is an unsigned integer scaled to the market's decimal places.
If set, the order will only be executed if the outcome of the trade moves the trader's position closer to 0. Only valid for non-persistent orders.
Arbitrary optional reference for the order, to be used as a human-readable non-unique identifier for the order.
Possible values: [SIDE_UNSPECIFIED
, SIDE_BUY
, SIDE_SELL
]
Default value: SIDE_UNSPECIFIED
Which side of the order book the order is for, e.g. buy or sell.
Size for the order, for example, in a futures market the size equals the number of units.
Possible values: [TIME_IN_FORCE_UNSPECIFIED
, TIME_IN_FORCE_GTC
, TIME_IN_FORCE_GTT
, TIME_IN_FORCE_IOC
, TIME_IN_FORCE_FOK
, TIME_IN_FORCE_GFA
, TIME_IN_FORCE_GFN
]
Default value: TIME_IN_FORCE_UNSPECIFIED
Time in force indicates how long an order will remain active before it is executed or expires..
Possible values: [TYPE_UNSPECIFIED
, TYPE_LIMIT
, TYPE_MARKET
, TYPE_NETWORK
]
Default value: TYPE_UNSPECIFIED
Type of the order.
Order will be submitted if the last traded price on the market breaches the given price.
Order will be submitted if the last traded price has moved the given percent from the highest/lowest mark price since the stop order was submitted.
risesAbove object
Stop order that will be triggered if the price rises above a given trigger price.
Timestamp, in Unix nanoseconds, for when the stop order should expire. If not set the stop order will not expire.
Possible values: [EXPIRY_STRATEGY_UNSPECIFIED
, EXPIRY_STRATEGY_CANCELS
, EXPIRY_STRATEGY_SUBMIT
]
Default value: EXPIRY_STRATEGY_UNSPECIFIED
Strategy to adopt if the expiry time is reached.
orderSubmission object
Order to be submitted once the trigger is breached.
Timestamp, in Unix nanoseconds, for when the order will expire. Can only be set when the order's time-in-force is GTT.
icebergOpts object
Iceberg order details. If set, the order will exist on the order book in chunks.
Minimum allowed remaining size of the order before it is replenished back to its peak size.
Size of the order that is made visible and can be traded with during the execution of a single order.
Market ID to submit the order to.
peggedOrder object
Pegged order details. If set, the order's price will be offset from a particular reference price of the order book at all times.
Offset from the price reference.
Possible values: [PEGGED_REFERENCE_UNSPECIFIED
, PEGGED_REFERENCE_MID
, PEGGED_REFERENCE_BEST_BID
, PEGGED_REFERENCE_BEST_ASK
]
Default value: PEGGED_REFERENCE_UNSPECIFIED
Price point the order is linked to.
If set, the order will only be executed if it would not trade on entry to the order book. Only valid for limit orders.
Price for the order, the price is an integer, for example 123456
is a correctly
formatted price of 1.23456
assuming market configured to 5 decimal places,
required field for limit orders, however it is not required for market orders.
This field is an unsigned integer scaled to the market's decimal places.
If set, the order will only be executed if the outcome of the trade moves the trader's position closer to 0. Only valid for non-persistent orders.
Arbitrary optional reference for the order, to be used as a human-readable non-unique identifier for the order.
Possible values: [SIDE_UNSPECIFIED
, SIDE_BUY
, SIDE_SELL
]
Default value: SIDE_UNSPECIFIED
Which side of the order book the order is for, e.g. buy or sell.
Size for the order, for example, in a futures market the size equals the number of units.
Possible values: [TIME_IN_FORCE_UNSPECIFIED
, TIME_IN_FORCE_GTC
, TIME_IN_FORCE_GTT
, TIME_IN_FORCE_IOC
, TIME_IN_FORCE_FOK
, TIME_IN_FORCE_GFA
, TIME_IN_FORCE_GFN
]
Default value: TIME_IN_FORCE_UNSPECIFIED
Time in force indicates how long an order will remain active before it is executed or expires..
Possible values: [TYPE_UNSPECIFIED
, TYPE_LIMIT
, TYPE_MARKET
, TYPE_NETWORK
]
Default value: TYPE_UNSPECIFIED
Type of the order.
Order will be submitted if the last traded price on the market breaches the given price.
Order will be submitted if the last traded price has moved the given percent from the highest/lowest mark price since the stop order was submitted.
transfer object
Command to submit a transfer.
Amount to be taken from the source account, as an unsigned integer scaled to the asset's decimal places.
Asset ID of the asset to be transferred.
Possible values: [ACCOUNT_TYPE_UNSPECIFIED
, ACCOUNT_TYPE_INSURANCE
, ACCOUNT_TYPE_SETTLEMENT
, ACCOUNT_TYPE_MARGIN
, ACCOUNT_TYPE_GENERAL
, ACCOUNT_TYPE_FEES_INFRASTRUCTURE
, ACCOUNT_TYPE_FEES_LIQUIDITY
, ACCOUNT_TYPE_FEES_MAKER
, ACCOUNT_TYPE_BOND
, ACCOUNT_TYPE_EXTERNAL
, ACCOUNT_TYPE_GLOBAL_INSURANCE
, ACCOUNT_TYPE_GLOBAL_REWARD
, ACCOUNT_TYPE_PENDING_TRANSFERS
, ACCOUNT_TYPE_REWARD_MAKER_PAID_FEES
, ACCOUNT_TYPE_REWARD_MAKER_RECEIVED_FEES
, ACCOUNT_TYPE_REWARD_LP_RECEIVED_FEES
, ACCOUNT_TYPE_REWARD_MARKET_PROPOSERS
, ACCOUNT_TYPE_HOLDING
, ACCOUNT_TYPE_LP_LIQUIDITY_FEES
, ACCOUNT_TYPE_LIQUIDITY_FEES_BONUS_DISTRIBUTION
, ACCOUNT_TYPE_NETWORK_TREASURY
, ACCOUNT_TYPE_VESTING_REWARDS
, ACCOUNT_TYPE_VESTED_REWARDS
, ACCOUNT_TYPE_REWARD_AVERAGE_POSITION
, ACCOUNT_TYPE_REWARD_RELATIVE_RETURN
, ACCOUNT_TYPE_REWARD_RETURN_VOLATILITY
, ACCOUNT_TYPE_REWARD_VALIDATOR_RANKING
, ACCOUNT_TYPE_PENDING_FEE_REFERRAL_REWARD
]
Default value: ACCOUNT_TYPE_UNSPECIFIED
Account type from which the funds of the party should be taken.
oneOff object
Details of a one-off transfer that is executed once at a specified time.
Timestamp, in Unix nanoseconds, for when the transfer should be executed, i.e., assets transferred into the receiver's account.
recurring object
Details of a transfer that is executed once every epoch until stopped.
dispatchStrategy object
Optional parameter defining how a transfer is dispatched.
Asset to use for metric.
Possible values: [DISTRIBUTION_STRATEGY_UNSPECIFIED
, DISTRIBUTION_STRATEGY_PRO_RATA
, DISTRIBUTION_STRATEGY_RANK
]
Default value: DISTRIBUTION_STRATEGY_UNSPECIFIED
Possible values: [ENTITY_SCOPE_UNSPECIFIED
, ENTITY_SCOPE_INDIVIDUALS
, ENTITY_SCOPE_TEAMS
]
Default value: ENTITY_SCOPE_UNSPECIFIED
Mandatory enum that defines the entities within scope.
Possible values: [INDIVIDUAL_SCOPE_UNSPECIFIED
, INDIVIDUAL_SCOPE_ALL
, INDIVIDUAL_SCOPE_IN_TEAM
, INDIVIDUAL_SCOPE_NOT_IN_TEAM
]
Default value: INDIVIDUAL_SCOPE_UNSPECIFIED
Optional enum if the entity scope defined is for individuals, which determines the subset of individuals that are eligible to be rewarded.
Optional markets in scope.
Possible values: [DISPATCH_METRIC_UNSPECIFIED
, DISPATCH_METRIC_MAKER_FEES_PAID
, DISPATCH_METRIC_MAKER_FEES_RECEIVED
, DISPATCH_METRIC_LP_FEES_RECEIVED
, DISPATCH_METRIC_MARKET_VALUE
, DISPATCH_METRIC_AVERAGE_POSITION
, DISPATCH_METRIC_RELATIVE_RETURN
, DISPATCH_METRIC_RETURN_VOLATILITY
, DISPATCH_METRIC_VALIDATOR_RANKING
]
Default value: DISPATCH_METRIC_UNSPECIFIED
Metric to apply.
rankTable object[]
Ordered list, using start rank, defining the rank bands and share ratio for each band. Mandatory for the rank distribution strategy.
Last epoch at which this transfer shall be executed.
Factor that the initial transfer amount is multiplied by for each epoch that it is executed. For example if the initial transfer amount is 1000 and the factor is 0.5, then the amounts transferred per epoch will be 1000, 500, 250, 125, etc.
First epoch from which this transfer shall be executed.
Reference to be attached to the transfer.
Public key of the destination account.
Possible values: [ACCOUNT_TYPE_UNSPECIFIED
, ACCOUNT_TYPE_INSURANCE
, ACCOUNT_TYPE_SETTLEMENT
, ACCOUNT_TYPE_MARGIN
, ACCOUNT_TYPE_GENERAL
, ACCOUNT_TYPE_FEES_INFRASTRUCTURE
, ACCOUNT_TYPE_FEES_LIQUIDITY
, ACCOUNT_TYPE_FEES_MAKER
, ACCOUNT_TYPE_BOND
, ACCOUNT_TYPE_EXTERNAL
, ACCOUNT_TYPE_GLOBAL_INSURANCE
, ACCOUNT_TYPE_GLOBAL_REWARD
, ACCOUNT_TYPE_PENDING_TRANSFERS
, ACCOUNT_TYPE_REWARD_MAKER_PAID_FEES
, ACCOUNT_TYPE_REWARD_MAKER_RECEIVED_FEES
, ACCOUNT_TYPE_REWARD_LP_RECEIVED_FEES
, ACCOUNT_TYPE_REWARD_MARKET_PROPOSERS
, ACCOUNT_TYPE_HOLDING
, ACCOUNT_TYPE_LP_LIQUIDITY_FEES
, ACCOUNT_TYPE_LIQUIDITY_FEES_BONUS_DISTRIBUTION
, ACCOUNT_TYPE_NETWORK_TREASURY
, ACCOUNT_TYPE_VESTING_REWARDS
, ACCOUNT_TYPE_VESTED_REWARDS
, ACCOUNT_TYPE_REWARD_AVERAGE_POSITION
, ACCOUNT_TYPE_REWARD_RELATIVE_RETURN
, ACCOUNT_TYPE_REWARD_RETURN_VOLATILITY
, ACCOUNT_TYPE_REWARD_VALIDATOR_RANKING
, ACCOUNT_TYPE_PENDING_FEE_REFERRAL_REWARD
]
Default value: ACCOUNT_TYPE_UNSPECIFIED
Type of the destination account.
undelegateSubmission object
Command to remove tokens delegated to a validator.
Amount to undelegate, as an unsigned integer scaled to the governance asset's decimal places. If not set, then all delegations to the given validator node will be removed.
Possible values: [METHOD_UNSPECIFIED
, METHOD_NOW
, METHOD_AT_END_OF_EPOCH
]
Default value: METHOD_UNSPECIFIED
Method of delegation.
Node ID to undelegate stake from.
updateReferralSet object
Command to update a referral set.
ID of the referral set to update.
Whether or not the referral set should be considered a team that can participate in team games on the network.
team object
Team details, if the referral set is to be considered a team.
New link to an avatar for the team.
Whether or not the team is closed to new party members.
New name of the team.
New link to the team's homepage.
validatorHeartbeat object
Validator command sent automatically to signal regular participation in the network.
ethereumSignature object
Signature from the validator made using their Ethereum wallet.
Algorithm used to create the signature.
Hex encoded bytes of the signature.
Version of the algorithm used to create the signature.
Message which has been signed.
Node ID of the validator emitting the heartbeat.
vegaSignature object
Signature from the validator made using their Vega wallet.
Algorithm used to create the signature.
Hex encoded bytes of the signature.
Version of the algorithm used to create the signature.
voteSubmission object
Command to submit a vote on a governance proposal.
Submit vote for the specified proposal ID.
Possible values: [VALUE_UNSPECIFIED
, VALUE_NO
, VALUE_YES
]
Default value: VALUE_UNSPECIFIED
Actual value of the vote.
withdrawSubmission object
Command to submit a withdrawal.
Amount to be withdrawn, as an unsigned integer scaled to the asset's decimal places.
Asset to be withdrawn.
ext object
Details specific to the foreign chain, such as the receiver address.
erc20 object
ERC20 withdrawal details.
Address into which the bridge will release the funds.
Timestamp when the transaction happened, using RFC3399 format.
pow object
Components needed for the network to verify proof-of-work.
Number which, combined with the transaction identifier, will produce a hash with the required number of leading zeros to be accepted by the network.
Unique transaction identifier used to seed the proof-of-work hash.
signature object
Signature definition that allows the network to authenticate external data.
Algorithm used to create the signature.
Hex encoded bytes of the signature.
Version of the algorithm used to create the signature.
Possible values: [TX_VERSION_UNSPECIFIED
, TX_VERSION_V2
, TX_VERSION_V3
]
Default value: TX_VERSION_UNSPECIFIED
Transaction versions to maintain backwards compatibility of transaction formats.
{
"transaction": {
"block": "string",
"code": 0,
"command": {
"announceNode": {
"avatarUrl": "string",
"chainPubKey": "string",
"country": "string",
"ethereumAddress": "string",
"ethereumSignature": {
"algo": "string",
"value": "string",
"version": 0
},
"fromEpoch": "string",
"id": "string",
"infoUrl": "string",
"name": "string",
"submitterAddress": "string",
"vegaPubKey": "string",
"vegaPubKeyIndex": 0,
"vegaSignature": {
"algo": "string",
"value": "string",
"version": 0
}
},
"applyReferralCode": {
"id": "string"
},
"batchMarketInstructions": {
"amendments": [
{
"expiresAt": "string",
"marketId": "string",
"orderId": "string",
"peggedOffset": "string",
"peggedReference": "PEGGED_REFERENCE_UNSPECIFIED",
"price": "string",
"sizeDelta": "string",
"timeInForce": "TIME_IN_FORCE_UNSPECIFIED"
}
],
"cancellations": [
{
"marketId": "string",
"orderId": "string"
}
],
"stopOrdersCancellation": [
{
"marketId": "string",
"stopOrderId": "string"
}
],
"stopOrdersSubmission": [
{
"fallsBelow": {
"expiresAt": "string",
"expiryStrategy": "EXPIRY_STRATEGY_UNSPECIFIED",
"orderSubmission": {
"expiresAt": "string",
"icebergOpts": {
"minimumVisibleSize": "string",
"peakSize": "string"
},
"marketId": "string",
"peggedOrder": {
"offset": "string",
"reference": "PEGGED_REFERENCE_UNSPECIFIED"
},
"postOnly": true,
"price": "string",
"reduceOnly": true,
"reference": "string",
"side": "SIDE_UNSPECIFIED",
"size": "string",
"timeInForce": "TIME_IN_FORCE_UNSPECIFIED",
"type": "TYPE_UNSPECIFIED"
},
"price": "string",
"trailingPercentOffset": "string"
},
"risesAbove": {
"expiresAt": "string",
"expiryStrategy": "EXPIRY_STRATEGY_UNSPECIFIED",
"orderSubmission": {
"expiresAt": "string",
"icebergOpts": {
"minimumVisibleSize": "string",
"peakSize": "string"
},
"marketId": "string",
"peggedOrder": {
"offset": "string",
"reference": "PEGGED_REFERENCE_UNSPECIFIED"
},
"postOnly": true,
"price": "string",
"reduceOnly": true,
"reference": "string",
"side": "SIDE_UNSPECIFIED",
"size": "string",
"timeInForce": "TIME_IN_FORCE_UNSPECIFIED",
"type": "TYPE_UNSPECIFIED"
},
"price": "string",
"trailingPercentOffset": "string"
}
}
],
"submissions": [
{
"expiresAt": "string",
"icebergOpts": {
"minimumVisibleSize": "string",
"peakSize": "string"
},
"marketId": "string",
"peggedOrder": {
"offset": "string",
"reference": "PEGGED_REFERENCE_UNSPECIFIED"
},
"postOnly": true,
"price": "string",
"reduceOnly": true,
"reference": "string",
"side": "SIDE_UNSPECIFIED",
"size": "string",
"timeInForce": "TIME_IN_FORCE_UNSPECIFIED",
"type": "TYPE_UNSPECIFIED"
}
]
},
"blockHeight": "string",
"cancelTransfer": {
"transferId": "string"
},
"chainEvent": {
"builtin": {
"deposit": {
"amount": "string",
"partyId": "string",
"vegaAssetId": "string"
},
"withdrawal": {
"amount": "string",
"partyId": "string",
"vegaAssetId": "string"
}
},
"contractCall": {
"blockHeight": "string",
"blockTime": "string",
"error": "string",
"result": "string",
"specId": "string"
},
"erc20": {
"assetDelist": {
"vegaAssetId": "string"
},
"assetLimitsUpdated": {
"lifetimeLimits": "string",
"sourceEthereumAddress": "string",
"vegaAssetId": "string",
"withdrawThreshold": "string"
},
"assetList": {
"assetSource": "string",
"vegaAssetId": "string"
},
"block": "string",
"bridgeResumed": true,
"bridgeStopped": true,
"deposit": {
"amount": "string",
"sourceEthereumAddress": "string",
"targetPartyId": "string",
"vegaAssetId": "string"
},
"index": "string",
"withdrawal": {
"referenceNonce": "string",
"targetEthereumAddress": "string",
"vegaAssetId": "string"
}
},
"erc20Multisig": {
"block": "string",
"index": "string",
"signerAdded": {
"blockTime": "string",
"newSigner": "string",
"nonce": "string"
},
"signerRemoved": {
"blockTime": "string",
"nonce": "string",
"oldSigner": "string"
},
"thresholdSet": {
"blockTime": "string",
"newThreshold": 0,
"nonce": "string"
}
},
"nonce": "string",
"stakingEvent": {
"block": "string",
"index": "string",
"stakeDeposited": {
"amount": "string",
"blockTime": "string",
"ethereumAddress": "string",
"vegaPublicKey": "string"
},
"stakeRemoved": {
"amount": "string",
"blockTime": "string",
"ethereumAddress": "string",
"vegaPublicKey": "string"
},
"totalSupply": {
"tokenAddress": "string",
"totalSupply": "string"
}
},
"txId": "string"
},
"createReferralSet": {
"isTeam": true,
"team": {
"avatarUrl": "string",
"closed": true,
"name": "string",
"teamUrl": "string"
}
},
"delegateSubmission": {
"amount": "string",
"nodeId": "string"
},
"ethereumKeyRotateSubmission": {
"currentAddress": "string",
"ethereumSignature": {
"algo": "string",
"value": "string",
"version": 0
},
"newAddress": "string",
"submitterAddress": "string",
"targetBlock": "string"
},
"issueSignatures": {
"kind": "NODE_SIGNATURE_KIND_UNSPECIFIED",
"submitter": "string",
"validatorNodeId": "string"
},
"keyRotateSubmission": {
"currentPubKeyHash": "string",
"newPubKey": "string",
"newPubKeyIndex": 0,
"targetBlock": "string"
},
"liquidityProvisionAmendment": {
"commitmentAmount": "string",
"fee": "string",
"marketId": "string",
"reference": "string"
},
"liquidityProvisionCancellation": {
"marketId": "string"
},
"liquidityProvisionSubmission": {
"commitmentAmount": "string",
"fee": "string",
"marketId": "string",
"reference": "string"
},
"nodeSignature": {
"id": "string",
"kind": "NODE_SIGNATURE_KIND_UNSPECIFIED",
"sig": "string"
},
"nodeVote": {
"reference": "string",
"type": "TYPE_UNSPECIFIED"
},
"nonce": "string",
"oracleDataSubmission": {
"payload": "string",
"source": "ORACLE_SOURCE_UNSPECIFIED"
},
"orderAmendment": {
"expiresAt": "string",
"marketId": "string",
"orderId": "string",
"peggedOffset": "string",
"peggedReference": "PEGGED_REFERENCE_UNSPECIFIED",
"price": "string",
"sizeDelta": "string",
"timeInForce": "TIME_IN_FORCE_UNSPECIFIED"
},
"orderCancellation": {
"marketId": "string",
"orderId": "string"
},
"orderSubmission": {
"expiresAt": "string",
"icebergOpts": {
"minimumVisibleSize": "string",
"peakSize": "string"
},
"marketId": "string",
"peggedOrder": {
"offset": "string",
"reference": "PEGGED_REFERENCE_UNSPECIFIED"
},
"postOnly": true,
"price": "string",
"reduceOnly": true,
"reference": "string",
"side": "SIDE_UNSPECIFIED",
"size": "string",
"timeInForce": "TIME_IN_FORCE_UNSPECIFIED",
"type": "TYPE_UNSPECIFIED"
},
"proposalSubmission": {
"rationale": {
"description": "string",
"title": "string"
},
"reference": "string",
"terms": {
"cancelTransfer": {
"changes": {
"transferId": "string"
}
},
"closingTimestamp": "string",
"enactmentTimestamp": "string",
"newAsset": {
"changes": {
"builtinAsset": {
"maxFaucetAmountMint": "string"
},
"decimals": "string",
"erc20": {
"contractAddress": "string",
"lifetimeLimit": "string",
"withdrawThreshold": "string"
},
"name": "string",
"quantum": "string",
"symbol": "string"
}
},
"newFreeform": {},
"newMarket": {
"changes": {
"decimalPlaces": "string",
"instrument": {
"code": "string",
"future": {
"dataSourceSpecBinding": {
"settlementDataProperty": "string",
"tradingTerminationProperty": "string"
},
"dataSourceSpecForSettlementData": {
"external": {
"ethOracle": {
"abi": "string",
"address": "string",
"args": [
{}
],
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"method": "string",
"normalisers": [
{
"expression": "string",
"name": "string"
}
],
"requiredConfirmations": "string",
"trigger": {
"timeTrigger": {
"every": "string",
"initial": "string",
"until": "string"
}
}
},
"oracle": {
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"signers": [
{
"ethAddress": {
"address": "string"
},
"pubKey": {
"key": "string"
}
}
]
}
},
"internal": {
"time": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
]
},
"timeTrigger": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"triggers": [
{
"every": "string",
"initial": "string"
}
]
}
}
},
"dataSourceSpecForTradingTermination": {
"external": {
"ethOracle": {
"abi": "string",
"address": "string",
"args": [
{}
],
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"method": "string",
"normalisers": [
{
"expression": "string",
"name": "string"
}
],
"requiredConfirmations": "string",
"trigger": {
"timeTrigger": {
"every": "string",
"initial": "string",
"until": "string"
}
}
},
"oracle": {
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"signers": [
{
"ethAddress": {
"address": "string"
},
"pubKey": {
"key": "string"
}
}
]
}
},
"internal": {
"time": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
]
},
"timeTrigger": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"triggers": [
{
"every": "string",
"initial": "string"
}
]
}
}
},
"quoteName": "string",
"settlementAsset": "string"
},
"name": "string",
"perpetual": {
"clampLowerBound": "string",
"clampUpperBound": "string",
"dataSourceSpecBinding": {
"settlementDataProperty": "string",
"settlementScheduleProperty": "string"
},
"dataSourceSpecForSettlementData": {
"external": {
"ethOracle": {
"abi": "string",
"address": "string",
"args": [
{}
],
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"method": "string",
"normalisers": [
{
"expression": "string",
"name": "string"
}
],
"requiredConfirmations": "string",
"trigger": {
"timeTrigger": {
"every": "string",
"initial": "string",
"until": "string"
}
}
},
"oracle": {
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"signers": [
{
"ethAddress": {
"address": "string"
},
"pubKey": {
"key": "string"
}
}
]
}
},
"internal": {
"time": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
]
},
"timeTrigger": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"triggers": [
{
"every": "string",
"initial": "string"
}
]
}
}
},
"dataSourceSpecForSettlementSchedule": {
"external": {
"ethOracle": {
"abi": "string",
"address": "string",
"args": [
{}
],
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"method": "string",
"normalisers": [
{
"expression": "string",
"name": "string"
}
],
"requiredConfirmations": "string",
"trigger": {
"timeTrigger": {
"every": "string",
"initial": "string",
"until": "string"
}
}
},
"oracle": {
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"signers": [
{
"ethAddress": {
"address": "string"
},
"pubKey": {
"key": "string"
}
}
]
}
},
"internal": {
"time": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
]
},
"timeTrigger": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"triggers": [
{
"every": "string",
"initial": "string"
}
]
}
}
},
"interestRate": "string",
"marginFundingFactor": "string",
"quoteName": "string",
"settlementAsset": "string"
},
"spot": {
"baseAsset": "string",
"name": "string",
"quoteAsset": "string"
}
},
"linearSlippageFactor": "string",
"liquidityMonitoringParameters": {
"auctionExtension": "string",
"targetStakeParameters": {
"scalingFactor": 0,
"timeWindow": "string"
},
"triggeringRatio": "string"
},
"liquiditySlaParameters": {
"commitmentMinTimeFraction": "string",
"performanceHysteresisEpochs": "string",
"priceRange": "string",
"slaCompetitionFactor": "string"
},
"logNormal": {
"params": {
"mu": 0,
"r": 0,
"sigma": 0
},
"riskAversionParameter": 0,
"tau": 0
},
"lpPriceRange": "string",
"metadata": [
"string"
],
"positionDecimalPlaces": "string",
"priceMonitoringParameters": {
"triggers": [
{
"auctionExtension": "string",
"horizon": "string",
"probability": "string"
}
]
},
"quadraticSlippageFactor": "string",
"simple": {
"factorLong": 0,
"factorShort": 0,
"maxMoveUp": 0,
"minMoveDown": 0,
"probabilityOfTrading": 0
},
"successor": {
"insurancePoolFraction": "string",
"parentMarketId": "string"
}
}
},
"newSpotMarket": {
"changes": {
"decimalPlaces": "string",
"instrument": {
"code": "string",
"future": {
"dataSourceSpecBinding": {
"settlementDataProperty": "string",
"tradingTerminationProperty": "string"
},
"dataSourceSpecForSettlementData": {
"external": {
"ethOracle": {
"abi": "string",
"address": "string",
"args": [
{}
],
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"method": "string",
"normalisers": [
{
"expression": "string",
"name": "string"
}
],
"requiredConfirmations": "string",
"trigger": {
"timeTrigger": {
"every": "string",
"initial": "string",
"until": "string"
}
}
},
"oracle": {
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"signers": [
{
"ethAddress": {
"address": "string"
},
"pubKey": {
"key": "string"
}
}
]
}
},
"internal": {
"time": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
]
},
"timeTrigger": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"triggers": [
{
"every": "string",
"initial": "string"
}
]
}
}
},
"dataSourceSpecForTradingTermination": {
"external": {
"ethOracle": {
"abi": "string",
"address": "string",
"args": [
{}
],
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"method": "string",
"normalisers": [
{
"expression": "string",
"name": "string"
}
],
"requiredConfirmations": "string",
"trigger": {
"timeTrigger": {
"every": "string",
"initial": "string",
"until": "string"
}
}
},
"oracle": {
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"signers": [
{
"ethAddress": {
"address": "string"
},
"pubKey": {
"key": "string"
}
}
]
}
},
"internal": {
"time": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
]
},
"timeTrigger": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"triggers": [
{
"every": "string",
"initial": "string"
}
]
}
}
},
"quoteName": "string",
"settlementAsset": "string"
},
"name": "string",
"perpetual": {
"clampLowerBound": "string",
"clampUpperBound": "string",
"dataSourceSpecBinding": {
"settlementDataProperty": "string",
"settlementScheduleProperty": "string"
},
"dataSourceSpecForSettlementData": {
"external": {
"ethOracle": {
"abi": "string",
"address": "string",
"args": [
{}
],
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"method": "string",
"normalisers": [
{
"expression": "string",
"name": "string"
}
],
"requiredConfirmations": "string",
"trigger": {
"timeTrigger": {
"every": "string",
"initial": "string",
"until": "string"
}
}
},
"oracle": {
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"signers": [
{
"ethAddress": {
"address": "string"
},
"pubKey": {
"key": "string"
}
}
]
}
},
"internal": {
"time": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
]
},
"timeTrigger": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"triggers": [
{
"every": "string",
"initial": "string"
}
]
}
}
},
"dataSourceSpecForSettlementSchedule": {
"external": {
"ethOracle": {
"abi": "string",
"address": "string",
"args": [
{}
],
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"method": "string",
"normalisers": [
{
"expression": "string",
"name": "string"
}
],
"requiredConfirmations": "string",
"trigger": {
"timeTrigger": {
"every": "string",
"initial": "string",
"until": "string"
}
}
},
"oracle": {
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"signers": [
{
"ethAddress": {
"address": "string"
},
"pubKey": {
"key": "string"
}
}
]
}
},
"internal": {
"time": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
]
},
"timeTrigger": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"triggers": [
{
"every": "string",
"initial": "string"
}
]
}
}
},
"interestRate": "string",
"marginFundingFactor": "string",
"quoteName": "string",
"settlementAsset": "string"
},
"spot": {
"baseAsset": "string",
"name": "string",
"quoteAsset": "string"
}
},
"logNormal": {
"params": {
"mu": 0,
"r": 0,
"sigma": 0
},
"riskAversionParameter": 0,
"tau": 0
},
"metadata": [
"string"
],
"positionDecimalPlaces": "string",
"priceMonitoringParameters": {
"triggers": [
{
"auctionExtension": "string",
"horizon": "string",
"probability": "string"
}
]
},
"simple": {
"factorLong": 0,
"factorShort": 0,
"maxMoveUp": 0,
"minMoveDown": 0,
"probabilityOfTrading": 0
},
"slaParams": {
"commitmentMinTimeFraction": "string",
"performanceHysteresisEpochs": "string",
"priceRange": "string",
"slaCompetitionFactor": "string"
},
"targetStakeParameters": {
"scalingFactor": 0,
"timeWindow": "string"
}
}
},
"newTransfer": {
"changes": {
"amount": "string",
"asset": "string",
"destination": "string",
"destinationType": "ACCOUNT_TYPE_UNSPECIFIED",
"fractionOfBalance": "string",
"oneOff": {
"deliverOn": "string"
},
"recurring": {
"dispatchStrategy": {
"assetForMetric": "string",
"distributionStrategy": "DISTRIBUTION_STRATEGY_UNSPECIFIED",
"entityScope": "ENTITY_SCOPE_UNSPECIFIED",
"individualScope": "INDIVIDUAL_SCOPE_UNSPECIFIED",
"lockPeriod": "string",
"markets": [
"string"
],
"metric": "DISPATCH_METRIC_UNSPECIFIED",
"nTopPerformers": "string",
"notionalTimeWeightedAveragePositionRequirement": "string",
"rankTable": [
{
"shareRatio": 0,
"startRank": 0
}
],
"stakingRequirement": "string",
"teamScope": [
"string"
],
"windowLength": "string"
},
"endEpoch": "string",
"startEpoch": "string"
},
"source": "string",
"sourceType": "ACCOUNT_TYPE_UNSPECIFIED",
"transferType": "GOVERNANCE_TRANSFER_TYPE_UNSPECIFIED"
}
},
"updateAsset": {
"assetId": "string",
"changes": {
"erc20": {
"lifetimeLimit": "string",
"withdrawThreshold": "string"
},
"quantum": "string"
}
},
"updateMarket": {
"changes": {
"instrument": {
"code": "string",
"future": {
"dataSourceSpecBinding": {
"settlementDataProperty": "string",
"tradingTerminationProperty": "string"
},
"dataSourceSpecForSettlementData": {
"external": {
"ethOracle": {
"abi": "string",
"address": "string",
"args": [
{}
],
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"method": "string",
"normalisers": [
{
"expression": "string",
"name": "string"
}
],
"requiredConfirmations": "string",
"trigger": {
"timeTrigger": {
"every": "string",
"initial": "string",
"until": "string"
}
}
},
"oracle": {
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"signers": [
{
"ethAddress": {
"address": "string"
},
"pubKey": {
"key": "string"
}
}
]
}
},
"internal": {
"time": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
]
},
"timeTrigger": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"triggers": [
{
"every": "string",
"initial": "string"
}
]
}
}
},
"dataSourceSpecForTradingTermination": {
"external": {
"ethOracle": {
"abi": "string",
"address": "string",
"args": [
{}
],
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"method": "string",
"normalisers": [
{
"expression": "string",
"name": "string"
}
],
"requiredConfirmations": "string",
"trigger": {
"timeTrigger": {
"every": "string",
"initial": "string",
"until": "string"
}
}
},
"oracle": {
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"signers": [
{
"ethAddress": {
"address": "string"
},
"pubKey": {
"key": "string"
}
}
]
}
},
"internal": {
"time": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
]
},
"timeTrigger": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"triggers": [
{
"every": "string",
"initial": "string"
}
]
}
}
},
"quoteName": "string"
},
"perpetual": {
"clampLowerBound": "string",
"clampUpperBound": "string",
"dataSourceSpecBinding": {
"settlementDataProperty": "string",
"settlementScheduleProperty": "string"
},
"dataSourceSpecForSettlementData": {
"external": {
"ethOracle": {
"abi": "string",
"address": "string",
"args": [
{}
],
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"method": "string",
"normalisers": [
{
"expression": "string",
"name": "string"
}
],
"requiredConfirmations": "string",
"trigger": {
"timeTrigger": {
"every": "string",
"initial": "string",
"until": "string"
}
}
},
"oracle": {
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"signers": [
{
"ethAddress": {
"address": "string"
},
"pubKey": {
"key": "string"
}
}
]
}
},
"internal": {
"time": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
]
},
"timeTrigger": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"triggers": [
{
"every": "string",
"initial": "string"
}
]
}
}
},
"dataSourceSpecForSettlementSchedule": {
"external": {
"ethOracle": {
"abi": "string",
"address": "string",
"args": [
{}
],
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"method": "string",
"normalisers": [
{
"expression": "string",
"name": "string"
}
],
"requiredConfirmations": "string",
"trigger": {
"timeTrigger": {
"every": "string",
"initial": "string",
"until": "string"
}
}
},
"oracle": {
"filters": [
{
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"key": {
"name": "string",
"numberDecimalPlaces": "string",
"type": "TYPE_UNSPECIFIED"
}
}
],
"signers": [
{
"ethAddress": {
"address": "string"
},
"pubKey": {
"key": "string"
}
}
]
}
},
"internal": {
"time": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
]
},
"timeTrigger": {
"conditions": [
{
"operator": "OPERATOR_UNSPECIFIED",
"value": "string"
}
],
"triggers": [
{
"every": "string",
"initial": "string"
}
]
}
}
},
"interestRate": "string",
"marginFundingFactor": "string",
"quoteName": "string"
}
},
"linearSlippageFactor": "string",
"liquidityMonitoringParameters": {
"auctionExtension": "string",
"targetStakeParameters": {
"scalingFactor": 0,
"timeWindow": "string"
},
"triggeringRatio": "string"
},
"liquiditySlaParameters": {
"commitmentMinTimeFraction": "string",
"performanceHysteresisEpochs": "string",
"priceRange": "string",
"slaCompetitionFactor": "string"
},
"logNormal": {
"params": {
"mu": 0,
"r": 0,
"sigma": 0
},
"riskAversionParameter": 0,
"tau": 0
},
"lpPriceRange": "string",
"metadata": [
"string"
],
"priceMonitoringParameters": {
"triggers": [
{
"auctionExtension": "string",
"horizon": "string",
"probability": "string"
}
]
},
"quadraticSlippageFactor": "string",
"simple": {
"factorLong": 0,
"factorShort": 0,
"maxMoveUp": 0,
"minMoveDown": 0,
"probabilityOfTrading": 0
}
},
"marketId": "string"
},
"updateMarketState": {
"changes": {
"marketId": "string",
"price": "string",
"updateType": "MARKET_STATE_UPDATE_TYPE_UNSPECIFIED"
}
},
"updateNetworkParameter": {
"changes": {
"key": "string",
"value": "string"
}
},
"updateReferralProgram": {
"changes": {
"benefitTiers": [
{
"minimumEpochs": "string",
"minimumRunningNotionalTakerVolume": "string",
"referralDiscountFactor": "string",
"referralRewardFactor": "string"
}
],
"endOfProgramTimestamp": "string",
"stakingTiers": [
{
"minimumStakedTokens": "string",
"referralRewardMultiplier": "string"
}
],
"windowLength": "string"
}
},
"updateSpotMarket": {
"changes": {
"logNormal": {
"params": {
"mu": 0,
"r": 0,
"sigma": 0
},
"riskAversionParameter": 0,
"tau": 0
},
"metadata": [
"string"
],
"priceMonitoringParameters": {
"triggers": [
{
"auctionExtension": "string",
"horizon": "string",
"probability": "string"
}
]
},
"simple": {
"factorLong": 0,
"factorShort": 0,
"maxMoveUp": 0,
"minMoveDown": 0,
"probabilityOfTrading": 0
},
"slaParams": {
"commitmentMinTimeFraction": "string",
"performanceHysteresisEpochs": "string",
"priceRange": "string",
"slaCompetitionFactor": "string"
},
"targetStakeParameters": {
"scalingFactor": 0,
"timeWindow": "string"
}
},
"marketId": "string"
},
"updateVolumeDiscountProgram": {
"changes": {
"benefitTiers": [
{
"minimumRunningNotionalTakerVolume": "string",
"volumeDiscountFactor": "string"
}
],
"endOfProgramTimestamp": "string",
"windowLength": "string"
}
},
"validationTimestamp": "string"
}
},
"protocolUpgradeProposal": {
"upgradeBlockHeight": "string",
"vegaReleaseTag": "string"
},
"stateVariableProposal": {
"proposal": {
"eventId": "string",
"kvb": [
{
"key": "string",
"tolerance": "string",
"value": {
"matrixVal": {
"value": [
{
"value": [
"string"
]
}
]
},
"scalarVal": {
"value": "string"
},
"vectorVal": {
"value": [
"string"
]
}
}
}
],
"stateVarId": "string"
}
},
"stopOrdersCancellation": {
"marketId": "string",
"stopOrderId": "string"
},
"stopOrdersSubmission": {
"fallsBelow": {
"expiresAt": "string",
"expiryStrategy": "EXPIRY_STRATEGY_UNSPECIFIED",
"orderSubmission": {
"expiresAt": "string",
"icebergOpts": {
"minimumVisibleSize": "string",
"peakSize": "string"
},
"marketId": "string",
"peggedOrder": {
"offset": "string",
"reference": "PEGGED_REFERENCE_UNSPECIFIED"
},
"postOnly": true,
"price": "string",
"reduceOnly": true,
"reference": "string",
"side": "SIDE_UNSPECIFIED",
"size": "string",
"timeInForce": "TIME_IN_FORCE_UNSPECIFIED",
"type": "TYPE_UNSPECIFIED"
},
"price": "string",
"trailingPercentOffset": "string"
},
"risesAbove": {
"expiresAt": "string",
"expiryStrategy": "EXPIRY_STRATEGY_UNSPECIFIED",
"orderSubmission": {
"expiresAt": "string",
"icebergOpts": {
"minimumVisibleSize": "string",
"peakSize": "string"
},
"marketId": "string",
"peggedOrder": {
"offset": "string",
"reference": "PEGGED_REFERENCE_UNSPECIFIED"
},
"postOnly": true,
"price": "string",
"reduceOnly": true,
"reference": "string",
"side": "SIDE_UNSPECIFIED",
"size": "string",
"timeInForce": "TIME_IN_FORCE_UNSPECIFIED",
"type": "TYPE_UNSPECIFIED"
},
"price": "string",
"trailingPercentOffset": "string"
}
},
"transfer": {
"amount": "string",
"asset": "string",
"fromAccountType": "ACCOUNT_TYPE_UNSPECIFIED",
"oneOff": {
"deliverOn": "string"
},
"recurring": {
"dispatchStrategy": {
"assetForMetric": "string",
"distributionStrategy": "DISTRIBUTION_STRATEGY_UNSPECIFIED",
"entityScope": "ENTITY_SCOPE_UNSPECIFIED",
"individualScope": "INDIVIDUAL_SCOPE_UNSPECIFIED",
"lockPeriod": "string",
"markets": [
"string"
],
"metric": "DISPATCH_METRIC_UNSPECIFIED",
"nTopPerformers": "string",
"notionalTimeWeightedAveragePositionRequirement": "string",
"rankTable": [
{
"shareRatio": 0,
"startRank": 0
}
],
"stakingRequirement": "string",
"teamScope": [
"string"
],
"windowLength": "string"
},
"endEpoch": "string",
"factor": "string",
"startEpoch": "string"
},
"reference": "string",
"to": "string",
"toAccountType": "ACCOUNT_TYPE_UNSPECIFIED"
},
"undelegateSubmission": {
"amount": "string",
"method": "METHOD_UNSPECIFIED",
"nodeId": "string"
},
"updateReferralSet": {
"id": "string",
"isTeam": true,
"team": {
"avatarUrl": "string",
"closed": true,
"name": "string",
"teamUrl": "string"
}
},
"validatorHeartbeat": {
"ethereumSignature": {
"algo": "string",
"value": "string",
"version": 0
},
"message": "string",
"nodeId": "string",
"vegaSignature": {
"algo": "string",
"value": "string",
"version": 0
}
},
"voteSubmission": {
"proposalId": "string",
"value": "VALUE_UNSPECIFIED"
},
"withdrawSubmission": {
"amount": "string",
"asset": "string",
"ext": {
"erc20": {
"receiverAddress": "string"
}
}
}
},
"createdAt": "string",
"cursor": "string",
"error": "string",
"hash": "string",
"index": 0,
"pow": {
"nonce": "string",
"tid": "string"
},
"signature": {
"algo": "string",
"value": "string",
"version": 0
},
"submitter": "string",
"type": "string",
"version": "TX_VERSION_UNSPECIFIED"
}
}
An unexpected error response.
Schema
- Array [
- ]
details object[]
{
"code": 0,
"details": [
{
"@type": "string"
}
],
"message": "string"
}